When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Great news. I cleared the codes again this morning and all codes disappeared. I am going to claim user error on this one. I guess I didn't clear the codes even though I know I did it 3 or 4 times.
At any rate, the last remaining code that I have is:
Code: U0102 - Lost Communication with TCCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Instrument Panel Control Module
I have had this code pop up since I purchased the truck. Any clue as to what it pertains to?
This was a great add and I am happy that I did it. It was easy to do also which was nice.
Did you make any changes to the IPC module with FORScan (besides the ones for ACC)?
Compare what you have now to your original values for the following addresses/locations and make sure you have the stock value:
720-01-01 *xxx xxxx xxxx
720-07-01 *xxx *xxx xxxx
anyone try this on a 2018 f150?? picking up a platinum but had to settle on one with out ACC package but every other package my truck comes with. i would like to add this. I also downloaded the asbuilts from another 2018 f150 platinum that comes with the stock ACC package
I didn't want to derail this thread, but all the right people are in this one.
I have two questions. My 2018 has adaptive cruise, Lane Assist, Park assist, Bliss.
Basically all the tech except for the Pro Trailer. Anyone's input on how that install would be, if
I have the correct OBD adapter, but my laptop is toast after a fatal fall.
My 2nd question is, will the Forscan Android app, work the same as a Windows laptop?
I have 3 tablets, current phone and a perfectly capable PC, but I don't have the one thing I need, a new laptop...
I flipped a coin to decide whether to buy a new Windows laptop or a rear sway bar... The sway bar will be here Tuesday.
So any chance I can change codes thru the forscan app, before I drop $5 bucks.
Normally I could afford both, but I spent a lot of dough these past few months on different needs
Just buy a long USB cable and put the computer on a bench, cables are cheap.
Is there an updated parts list available? I want to get started gathering parts. I see the light at the end of the tunnel on my truck and if all goes well, going to hang onto it for a while.
Just buy a long USB cable and put the computer on a bench, cables are cheap.
Is there an updated parts list available? I want to get started gathering parts. I see the light at the end of the tunnel on my truck and if all goes well, going to hang onto it for a while.
Originally Posted by Firerunner
You cannot change code with the app - only thru a computer
Good advice..acdii and thanks Firerunner.
Anyone have a thought about installing the Pro Trailer ? Or what I recently discovered, is that it's called the Noob ****... outside of our family.
Does anyone know the part number for the clips that go on the bumper trim panel? The teeth on the a few of the clips broke and need to be replaced. I am having the hardest time finding a part number for them.
04-15-2018, 11:00 AM
