Adaptive Cruise Control *Added*
08-30-2017, 11:02 PM
#651
Senior Member
Huh, what? Me?! Nah...
But seriously though, I need to save some to get the stuff for the 360 retrofit. I am NOT looking forward to wiring from the BCM, there's no space down there. But the idea of having full emergency stopping and pedestrian detection is too much to overcome.
dammit
But seriously though, I need to save some to get the stuff for the 360 retrofit. I am NOT looking forward to wiring from the BCM, there's no space down there. But the idea of having full emergency stopping and pedestrian detection is too much to overcome.
dammit
09-01-2017, 05:14 AM
#652
Really big thanks to all the contributors here, I'm really excited about adding ACC to my truck but I've hit a snag - I have a 2015 Lariat 502a 5.0l and I have all the parts except the harness.
I'm being told FL3Z-15K867-F is out of stock in North America, could be a month or more away.
Can I use the B harness that is specified for the 3.5l? I can't remember which truck has extra accessories run off this harness.
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
I'm being told FL3Z-15K867-F is out of stock in North America, could be a month or more away.
Can I use the B harness that is specified for the 3.5l? I can't remember which truck has extra accessories run off this harness.
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
Last edited by ventura; 09-01-2017 at 05:22 AM.
09-01-2017, 06:10 AM
#653
Really big thanks to all the contributors here, I'm really excited about adding ACC to my truck but I've hit a snag - I have a 2015 Lariat 502a 5.0l and I have all the parts except the harness.
I'm being told FL3Z-15K867-F is out of stock in North America, could be a month or more away.
Can I use the B harness that is specified for the 3.5l? I can't remember which truck has extra accessories run off this harness.
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
I'm being told FL3Z-15K867-F is out of stock in North America, could be a month or more away.
Can I use the B harness that is specified for the 3.5l? I can't remember which truck has extra accessories run off this harness.
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
If the connector in the attached PDF is available you could add 4 wires to your existing harness - it wouldn't be that difficult to do.
C-CM C1582 connector.pdf
09-01-2017, 04:20 PM
#654
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
Really big thanks to all the contributors here, I'm really excited about adding ACC to my truck but I've hit a snag - I have a 2015 Lariat 502a 5.0l and I have all the parts except the harness.
I'm being told FL3Z-15K867-F is out of stock in North America, could be a month or more away.
Can I use the B harness that is specified for the 3.5l? I can't remember which truck has extra accessories run off this harness.
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
I'm being told FL3Z-15K867-F is out of stock in North America, could be a month or more away.
Can I use the B harness that is specified for the 3.5l? I can't remember which truck has extra accessories run off this harness.
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
...or as stated above me , you could make your own.
09-01-2017, 04:54 PM
#655
Senior Member
iTrader: (14)
As a side note, although the parts websites say that the E harness has the distance sensor, it does not have the distance sensor plug.
/licks star, smashes on forehead
09-01-2017, 04:57 PM
#657
Senior Member
iTrader: (14)
Huh, what? Me?! Nah...
But seriously though, I need to save some to get the stuff for the 360 retrofit. I am NOT looking forward to wiring from the BCM, there's no space down there. But the idea of having full emergency stopping and pedestrian detection is too much to overcome.
dammit
:wallbang:
But seriously though, I need to save some to get the stuff for the 360 retrofit. I am NOT looking forward to wiring from the BCM, there's no space down there. But the idea of having full emergency stopping and pedestrian detection is too much to overcome.
dammit
:wallbang:
09-01-2017, 04:59 PM
#658
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
09-01-2017, 10:17 PM
#659
Thanks for that info...I have a 2.7 & was going to get the "E" harness - guess I'll try the "B" harness now...speaking of which, my thinking is that it would work for you... It would have an extra connector for the lower louvers that you don't have though
...or as stated above me , you could make your own.
...or as stated above me , you could make your own.
09-01-2017, 10:51 PM
#660
Completed install today on the 5.0l, big thanks again to everyone contributing, the writeups with pictures were really helpful and being able to calibrate the sensor with Forscan is awesome, no dealer needed. I was able to install the harness without bumper removal, I'm thinking we have more room to work on the 5.0 trucks vs the ecoboost.