SixShooter14

a composite board is a good idea. I was thinking about using a 2x6 or 2x10 and having bedliner sprayed on it.

Slowtrucker

Hmmm...


I had a 1x4 pressure treated stick that I cut to fit and beefed the ends up with the leftover chunk split into 2 so it would not rattle around. Probably less than $10

Patioboater

That was my original plan, but I had an old 2x6 handy that only needed a couple of inches cut off the end. So ... I spent $50K for a Lariat, but I saved $20 on the bed divider and cite the latter when explaining to my wife that my pickup truck ownership is fiscally responsible.

Mikeer

Thanks, I saw that but it started off as a SYNC thread but turned into a SYNC3 thread. I replied in that thread to see if there was an update or in case I misread something.

ZeroTX

Anyone else want to double check their boards to give me the exact length? I need to have Home Depot cut it, because I don't have a working saw at the moment and being that I don't do woodworking, I don't want to invest in a saw for this.

EKD

Painted the wheel wells with Dupli-Color Rubberized Undercoat

Johnny_bravo00

Do you have a bedliner?

SSowinski

With the deck board they even have caps for the ends to finish it off.

Husker

iTrader: (4)

I stopped by Lowes the other day to P/U a deck board...They don't sell em here in Lincoln...Did you get yers at HD or Menards?

Slowtrucker

63 1/4 inches measured from the outside of the extra piece. Just now.