FORScan - software to enable/disable features in your truck
Thanks for the as built data link. When i have some time I am going to reset everything so I can try to save it correctly this time. Question is, how do I save it correctly?
Also, sorry the pics are so big, I don't know how to make them smaller.
Last edited by warrenmitchell; 11-10-2017 at 11:38 PM.
Livin and Company, Edges have a forward 180* camera, is there by chance a value to enable this where I can add just a front camera? I do NOT want 360 top down view.
I also remember a while back someone asking if you could make full screen rear camera the default on vehicles equipped with the 360 can, is that doable?
I also remember a while back someone asking if you could make full screen rear camera the default on vehicles equipped with the 360 can, is that doable?
Livin and Company, Edges have a forward 180* camera, is there by chance a value to enable this where I can add just a front camera? I do NOT want 360 top down view.
I also remember a while back someone asking if you could make full screen rear camera the default on vehicles equipped with the 360 can, is that doable?
I also remember a while back someone asking if you could make full screen rear camera the default on vehicles equipped with the 360 can, is that doable?
Don't think the default to full screen was possible. you would have to turn off the 360.
The FORScan Guy
Thread Starter
Nothing stands out as wrong with your values. As far as loading your backup file...try renaming your DDM backup file DDM-ab.abt and see if it loads. I'm wondering if it's because of the way you named them that FORScan is having an issue with when you try and load them.
Last edited by Livnitup; 11-11-2017 at 12:15 AM.
The FORScan Guy
Thread Starter
Livin and Company, Edges have a forward 180* camera, is there by chance a value to enable this where I can add just a front camera? I do NOT want 360 top down view.
I also remember a while back someone asking if you could make full screen rear camera the default on vehicles equipped with the 360 can, is that doable?
I also remember a while back someone asking if you could make full screen rear camera the default on vehicles equipped with the 360 can, is that doable?
What are your current values in APIM at 7D0-02-01 xxxx xxxx **xx?
Senior Member
iTrader: (1)
Ok make for sure that if one side is heating up that rules out the fuses. F17 fuse is in the battery junction box. Sorry I fail to mention that F 12 fuse is at the body control module right side passenger kick panel both feed the front control interface module (FCIM).
Pm me if you need more info or help.
Pm me if you need more info or help.
Does my seat module need to be reset? I guess I could check for DTC’s.
Senior Member
Try a reset on the FCIM. See if you have any Dtc for it. This is the module your buttons are on. Ok now it sound maybe you might have bad connection in drivers seat or a bad sensor in the driver seat bum. There are many connectors the wire go thru from the FCIM to the drivers seat. You also can try to reseat the connectors C311( big one under front of seat)and C3050 under the drivers seat. There are the easiest to get to. Not the yellow one, that one don’t touch. Here is the wiring dia. To help
Senior Member
iTrader: (1)
Heated seat only are operated thru the FCIM module on yours.
Try a reset on the FCIM. See if you have any Dtc for it. This is the module your buttons are on. Ok now it sound maybe you might have bad connection in drivers seat or a bad sensor in the driver seat bum. There are many connectors the wire go thru from the FCIM to the drivers seat. You also can try to reseat the connectors C311( big one under front of seat)and C3050 under the drivers seat. There are the easiest to get to. Not the yellow one, that one don’t touch. Here is the wiring dia. To help
Try a reset on the FCIM. See if you have any Dtc for it. This is the module your buttons are on. Ok now it sound maybe you might have bad connection in drivers seat or a bad sensor in the driver seat bum. There are many connectors the wire go thru from the FCIM to the drivers seat. You also can try to reseat the connectors C311( big one under front of seat)and C3050 under the drivers seat. There are the easiest to get to. Not the yellow one, that one don’t touch. Here is the wiring dia. To help
Thank you.
Worst case I’ll make them fix it when I get my recall done lol