Airborne_Ape

Places I’ll be in the next 30 days if you need ForScan help (not in any particular order):

Edmonton
Red Deer
Calgary
Vancouver
Surrey
Coquitlam
Langley
Abottsford
Penticton
Prince George
Vernon
Maple Ridge
Kelowna
Fort St John
Cranbrook
Williams Lake

Airborne_Ape

Its not auto correct thats the problem. Its caused by people using correct punctuation with iOS on the only approved app supported by this website for use with these forums.

Example:
They’re having an Android party over there and it looks like it’s a lot of fun. Maybe all of us iOS guys should just give up on Apple and join in on the fun.

...

Seriously though, Id support Livnitnup if he ever wants to move away from this flash heavy website and start his own. Even on Windows this thread is a mess from any typical browser.

Livnitup

I did a complete mapping and provided the exact descriptions it showed me on my screen so there's not much else I can expand on except test values myself. I have an hour-long drive each way to do tomorrow so I'll try some values and see if I notice anything.

bamorris2

Did v2.3 fix this? I hate that sync does that.

chrisnack

Did some programming on my 2018 tonight.

-Disabled the double horn honk (that was annoying when you would get out with the fob)
-Enabled bambi mode
-Added heated steering wheel/seats to home page
-Added parking lights on with DRL halo's (hopefully)

Hard to test the parking lights being on, but hopefully got it. Headlights are always on in my garage even with 50,000 lumens of light , so i'll have to check tomorrow in the daylight. Not sure if the halo's are in the same code or a different section.

Assuming i got it working, should look great as the rear LED's are super bright and the new amber "bar" on the 2018's looks awesome lit up between the halo's.

doomgazer

Unfortunately, no. Mine's still doing it about 2 out of every 3 ignition cycles (especially after sitting for a while).

chrisnack

So i verified Bambi mode is working, however the fog light memory is not. So i'll need to verify the code again but i know i did:
BCM 726-27-01 xxxx xxx0 01xx

Sawdust102

My 2018 the fog light already had the memory function active. So by making any changes you might have messed it up.

chrisnack

Yup, same, so i'm guessing be enabling the bambi mode, it disabled that, even though bambi mode now works. Or the code is just different on a 2018.

Is there a way to just look at a certain line of the as-built i backed up? I'd prefer not restore it all if i can. AKA, i'd like to know what the stock value was for just those 2 lines, rather than restoring the whole module and redoing all the BCM configurations again.

Mlarv

I know before I ask this question that I should know the answer, but I don't.

I want to do the reverse mirror mod. I keep seeing mention if holding in the memory button for calibration. What is or better yet where is the memory button they are talking about?