Magdon

Thanks for all of your hard work on this!

Striker01

Changed a bunch of stuff on my 18 with forscan today. Big thanks to Livnitup for the tutorial, just followed his instructions and it was pretty easy.

Now I just need someone to figure how to make the truck not shutdown after 20 minutes, or whatever it is, when I get out with it running.

cwcb08

I think airbornape figured that out a few pages back and posted a video?

Striker01

Thanks, I'll look. Tried a search a few days ago but no luck.

Striker01

Found the video on page 1255. Unless I missed something, he just shows that he got it turned off; not how to do it. I'll do some more checking tomorrow.

redbroncokid

iTrader: (1)

is this what your looking for?? aeis = auto engine idle shutdown
found in post 12174

720-01-01
x*xx
xxxx
xxxx
AEIS With Override, ABS Config, ACC Menu Config, Adaptive Cruise
0=AEIS disabled, ABS disabled, ACC menu disabled, AC disabled


8=AEIS enabled, ABS disabled, ACC menu disabled, AC disabled
1=AEIS disabled, ABS disabled, ACC menu disabled, AC enabled


9=AEIS enabled, ABS disabled, ACC menu disabled, AC enabled
2=AEIS disabled, ABS disabled, ACC menu enabled, AC disabled


A=AEIS enabled, ABS disabled, ACC menu enabled, AC disabled
3=AEIS disabled, ABS disabled, ACC menu enabled, AC enabled


B=AEIS enabled, ABS disabled, ACC menu enabled, AC enabled
4=AEIS disabled, ABS enabled, ACC menu disabled, AC disabled


C=AEIS enabled, ABS enabled, ACC menu disabled, AC disabled
5=AEIS disabled, ABS enabled, ACC menu disabled, AC enabled


D=AEIS enabled, ABS enabled, ACC menu disabled, AC enabled
6=AEIS disabled, ABS enabled, ACC menu enabled, AC disabled


E=AEIS enabled, ABS enabled, ACC menu enabled, AC disabled
7=AEIS disabled, ABS enabled, ACC menu enabled, AC enabled


F=AEIS enabled, ABS enabled, ACC menu enabled, AC enabled

rliles1

A more concise way to say this is, if all you want to do is disable AEIS, subtract 8 from whatever number is currently in this position. Remember that A=10, B=11, C=12, D=13, E=14, F=15.

720-01-01 x*xx xxxx xxxx

skywagon

Livinitup,

Has anyone else experienced an error code while modifying tire size on 2017 ecoboost's?

Can any one else confirm no errors on the '17's or '18's when modifying tire size?

I still have the error.

Livnitup

When you change tire size on a '17 or '18 you'll get the wrench and the P160A DTC.

To fix this, after you do the tire size change in BCM go into the programming screen in FORScan and run the top procedure called "PCM Module Initialization/relearn vehicle data." If you also see an option in the programming screen called something like "TCM relearn" (2018s) run that afterwards.





If you don't see the "PCM Module Initialization/relearn vehicle data" option in the programming screen then you're using an older version of FORScan and you need to install the newest one available: http://forscan.org/download.html

This procedure should get rid of the wrench icon on the cluster and the DTCs.

PhilZX6

Is there a way to get the entire orange led in the headlight to flash when the headlights are on? When the headlight is off everything flashes but when they are on only a small part does. I attached a video to explain what i'm talking about.