When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1. what version of Sync 3 are you running?
2. what theme are you trying to do?
its v2.2...
I've tried all of them. the only thing that changes is the splash screen.. I even closed forscan and opened back up and verified the changes were there.. I also tried doing the windows and that doesn't work either..
I've tried all of them. the only thing that changes is the splash screen.. I even closed forscan and opened back up and verified the changes were there.. I also tried doing the windows and that doesn't work either..
Try these for the GT Blue theme to test and then reset the APIM in FORScan wrench icon after you make the changes and see if it works:
7D0-01-02 0xxx xxxx xxxx
7D0-02-01 xxxx xDxx xxxx
7D0-03-01 xxxx x4xx xxxx
Try these for the GT Blue theme to test and then reset the APIM in FORScan wrench icon after you make the changes and see if it works:
7D0-01-02 0xxx xxxx xxxx
7D0-02-01 xxxx xDxx xxxx
7D0-03-01 xxxx x4xx xxxx
I went through and started/finished setup and programming with ease because of the instructions and work you all have done!
2016 Ford F150 Eco 3.5 King Ranch SCREW 4x4 with all options
Did the following last night:
-Global Windows
-Perp Parking (With 3 presses; it exits the parking assist but 2-3 seconds later my rear camera pops up)
-Disable Double Horn
-Increased Turn Signal Flashes
Please let me know if I can help. Hoping for the 360 Cameras at any speed to happen soon ... I see where the FORScan app doesn't read the IPMB correctly (but does read the IPMA correctly).
I just did Police Dark Mode on my truck. What I am trying to do is get the exterior lights to stay off when I open the door but allow the interior lights to turn on so I can see inside. Is it possible to have exterior off and interior on when opening the door or is all or none? Thanks!
Possible bug? I needed the exterior light on the mirror last night on my 2015 platinum 4x4. I did the code to auto fold mirrors when locked and now I don't have right or left light ability when I select them on the dash (button with light for left and right).
Anyone with a Platinum that did the auto fold mod. Can you check to see if you still have the ability to turn your side lights on for mirror?
I just did Police Dark Mode on my truck. What I am trying to do is get the exterior lights to stay off when I open the door but allow the interior lights to turn on so I can see inside. Is it possible to have exterior off and interior on when opening the door or is all or none? Thanks!
No one has found a way to do that (much to my chagrin as it's what I want too.)
With Police Dark, you have to turn on the interiors yourself using the switch. Had I been the design engineer I would have set it up so that the exteriors are off and the interiors are controlled the same as they normally work, but Ford has a long history of not asking me how to do things.
This is exactly what I needed. Thank You. I had the older version.
Originally Posted by Livnitup
When you change tire size on a '17 or '18 you'll get the wrench and the P160A DTC.
To fix this, after you do the tire size change in BCM go into the programming screen in FORScan and run the top procedure called "PCM Module Initialization/relearn vehicle data." If you also see an option in the programming screen called something like "TCM relearn" (2018s) run that afterwards.
If you don't see the "PCM Module Initialization/relearn vehicle data" option in the programming screen then you're using an older version of FORScan and you need to install the newest one available: http://forscan.org/download.html
This procedure should get rid of the wrench icon on the cluster and the DTCs.
Possible bug? I needed the exterior light on the mirror last night on my 2015 platinum 4x4. I did the code to auto fold mirrors when locked and now I don't have right or left light ability when I select them on the dash (button with light for left and right).
Anyone with a Platinum that did the auto fold mod. Can you check to see if you still have the ability to turn your side lights on for mirror?
Did you verify you changed only what needed to be changed? Try putting the settings back to original. The wiring for a Platinum is not any different from other models with spotlights.
11-28-2017, 09:32 AM
... I see where the FORScan app doesn't read the IPMB correctly (but does read the IPMA correctly).
