When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
No, haven't even left yet. It's only 7:30am here right now so I'll be leaving in an hour. Thanks again everyone for your support, your generosity made my team #5 on list!!
I don't know what type of climate system you have. If you don't have dual climate controls try this instead but it might be applicable to sync 3 only.
7D0-01-01 **** **** *3**
7D0-04-01 **** ***2 ****
7D0-01-01 **2* **** **** = stereo extended play 20 min
The last two values will always change where as they are the checksum and no they don't matter.
Originally Posted by Livnitup
If your original value was this: 7D0-01-01 was 2AAA 0006 00B3 then do this: 7D0-01-01 xxxx xxxx 03xx. I can't remember if the "A" is necessary or not so try "03" and if that doesn't work do "A3" The last 2 checksum digits will change when any change is done to the address. If you do NAV in motion you can't have 911 assistance enabled because by enabling NAV in motion you are telling it you live in another country.
Thanks guys. I am an idiot and forgot that I had changed the first first series of values from 2AAA to 2A2A so that I could turn the stereo on when the truck was off. Knowing the last two digits change due to the checksum makes much more sense and puts me at ease. I switched the value from A6 to 03 and it worked perfect, now the display only shows the heated seats.
I did double check the Nav in Motion value once again. I currently have 7D0-02-01 set to 5753 xxxx xxxx. When I turn on my truck it tells me that emergency assistance is enabled. I will get the exact message tomorrow. I am going to see if I can read texts while driving but is there a way I can verify if the 911 service is disabled or enabled?
Hope there was a good turnout at the walk and the weather cooperated!
Would there be anyone in the Denver Colorado area that could help me out with either getting this setup on one of my computers or just changing the 12v outlets so they turn off with the ignition? I have several OBC cables but have no idea if any of them would work. Never had a blue tooth setup before ??? I are ignorant.
I run a dash cam and the 12v outlet seems to be on all the time so I have to unplug it every time I stop.
I have this kind of software for my BMW, Porsche, Ducati, Moto Guzzi but am having a hard time figuring this out for the F150 I just bought.
Would there be anyone in the Denver Colorado area that could help me out with either getting this setup on one of my computers or just changing the 12v outlets so they turn off with the ignition? I have several OBC cables but have no idea if any of them would work. Never had a blue tooth setup before ??? I are ignorant.
I run a dash cam and the 12v outlet seems to be on all the time so I have to unplug it every time I stop.
I have this kind of software for my BMW, Porsche, Ducati, Moto Guzzi but am having a hard time figuring this out for the F150 I just bought.
Thanks.
Marc
By default, they turn off after 75 minutes. I feel your pain though. I used ForScan to change that 75 minute default to 1 second (as close as I could get to immediately). Then I hard wired ONE of the outlets, the one on the back of the center console, to be on 24/7/365. That way, if I ever have a need, I have one. However, it is not easy to reach from the front seat so I have to WANT to use it.
By default, they turn off after 75 minutes. I feel your pain though. I used ForScan to change that 75 minute default to 1 second (as close as I could get to immediately). Then I hard wired ONE of the outlets, the one on the back of the center console, to be on 24/7/365. That way, if I ever have a need, I have one. However, it is not easy to reach from the front seat so I have to WANT to use it.
The other thing you need to remember, yes the timeout is 75 minutes, but if the battery voltage gets low enough, the Battery Managament System will shut off the power to prevent the battery from going completely dead so hopefully you can still start the truck.
The hardwired outlet will not have that protection, but that the is the idea.
Wasting 75 minutes of video storage on my dash cam just aint cutting it for me guys. I guess I will ask the dealer if they can be turned off. I would love to be able to do this myself.
Wasting 75 minutes of video storage on my dash cam just aint cutting it for me guys. I guess I will ask the dealer if they can be turned off. I would love to be able to do this myself.
Marc
Hardwire the dash cam to the BCM with a add-a-fuse, thats how I set mine up
I am able to view texts while driving by setting the value 7D0-02-01 to 5753 xxxx xxxx. Below are some images (potato quality) that show the emergency assistance is still enabled. I was thinking that this should not be enabled by doing this. If the airbags deploy will 911 still be dialed? Sorry, I will not be testing that one.
I am able to view texts while driving by setting the value 7D0-02-01 to 5753 xxxx xxxx. Below are some images (potato quality) that show the emergency assistance is still enabled. I was thinking that this should not be enabled by doing this. If the airbags deploy will 911 still be dialed? Sorry, I will not be testing that one.
Must be a Sync2 vs Sync3 thing. Enabling NAV in motion on Sync 3 will disable the 911 assist.
12-03-2017, 10:33 AM
I guess I will ask the dealer if they can be turned off. I would love to be able to do this myself.
