Beachums

I've read the last 50 pages or so..... and search the thread with the utility and I did not find a definitive answer. So here it goes...

Is there any remedy to change the speedo for a new tire size that works on a 2017 without throwing a wrench light?

cekgsk

FORscan Gods....I have a '15 Lariat with the 502a package. I swapped my steering wheel for JL3Z-3600-LA that had the adaptive cruise controls. I swapped the adaptive cruise controls to my wheel (I want to add this later). I made the change in SCCM, 724-03-01, **xx xxxx xx, from 11 to 12 according to the FORscan spreadsheet. However, now the cruise does not work. Did I miss a step? All other controls work as they should, audio and scrolling through the cluster display. I appreciate the help.

Livnitup

https://www.f150forum.com/f118/forsc...3/#post5558405

Livnitup

If you have the steering wheel with ACC buttons installed now but you haven't done anything to add the ACC, then try keeping the SCCM value as base cruise so that it should work with your current base cruise and try it.
724-03-01 11xx xxxx xx - 11=Ford Base Cruise

Beachums

Thank you sir. I will have confirmed/calibrated codes for some 37s. Particulars and tire info to follow.

1st-F-150

iTrader: (1)

For those who don't have power running boards and would like some, great thread with detailed instructions on how to. One simple change with Forscan and you're good to go. A set has been installed on both an XLT and a Lariat.

https://www.f150forum.com/f118/oem-p...402443/index7/

Back to regular programming...

digitaltrucker

Saw a guy yesterday in a Plat, his wings were down while he was driving!

toledoUPSguy

iTrader: (1)

I hate to disagree with the forscan guru but you have to change the 11 to a 12 so the SCCM knows it is the ACC switch. The only part of required ACC parts is the switch and once I changed the left switch to 12 it works perfectly as regular cruise. Leaving it as the "11" and the cruise didn't work at all.

dominatorlp

I did the speed calibration today. Everything went fine except there's a DTC in forscan, no light on the dash. U2101. Is that normal?

icecoldak

Anyone that can post a picture of their truck with the heated/cooled Seats and steering wheel on their display after the forscan mod! thanks