FORScan - software to enable/disable features in your truck
02-17-2018, 01:47 PM
Thank you all for all the countless hours of work.
Today my 2017 F150 STX had the following changes
Added backup camera to sync 3 8” screen
Turn signals @ 7 flashes
Disable panic mode
Disable door chime
Will play again later with some other options but since I do. It have allot of options looks like choices are limited.
With this thread I now can firmly say the XL is everything I want nothing I don’t
Today my 2017 F150 STX had the following changes
Added backup camera to sync 3 8” screen
Turn signals @ 7 flashes
Disable panic mode
Disable door chime
Will play again later with some other options but since I do. It have allot of options looks like choices are limited.
With this thread I now can firmly say the XL is everything I want nothing I don’t
02-17-2018, 02:13 PM
Senior Member
Still trying to get the hyperflash fixed and the back up sensors silenced
everything else I have tried has worked. I switched my start up screen to the GT Performance display, but forgot I disabled that and enabled the quick boot.
everything else I have tried has worked. I switched my start up screen to the GT Performance display, but forgot I disabled that and enabled the quick boot.
Last edited by dcmII; 02-17-2018 at 05:25 PM.
02-17-2018, 02:42 PM
02-17-2018, 03:01 PM
Just want to verify that all needed changed once 36 gal tank is installed is as below. Any input appreciated.
720-03-01 xxx5 54xx xxxx 36 Gal
720-03-01 xxx3 67xx xxxx 23 Gal
720-03-01 xxx5 54xx xxxx 36 Gal
720-03-01 xxx3 67xx xxxx 23 Gal
02-17-2018, 03:44 PM
Senior Member
The following users liked this post:
pohlmeyr (02-17-2018)
02-17-2018, 03:52 PM
02-17-2018, 04:23 PM
I am new to this and was going to back up as recommended. Should I back up every as built module or only the ones marked with the arrows? I only plan on making the changes in this awesome document that Livnitup created. Thank you.
Updated 2/22/17
For a tutorial on getting started with FORScan, please follow the link below:
https://docs.google.com/document/d/1...it?usp=sharing
For a tutorial on getting started with FORScan, please follow the link below:
https://docs.google.com/document/d/1...it?usp=sharing
02-17-2018, 05:03 PM
Senior Member
Yes it does, it didn't start working right away when I made the change. I didn't have the fan or temperature show before I made the change. I made the change and nothing happened, had an errand to run and when I got back into the truck at the store, I tried it and it worked.
The following users liked this post:
pohlmeyr (02-17-2018)
02-17-2018, 05:04 PM
Senior Member
Back up everything. Safer that way, and they don't take up much room.
02-17-2018, 05:44 PM
Yes it does, it didn't start working right away when I made the change. I didn't have the fan or temperature show before I made the change. I made the change and nothing happened, had an errand to run and when I got back into the truck at the store, I tried it and it worked.
7D0-04-01 xxxx xxx2 xxxx since i do not have the dual control. The fan speed shows up and works fine. Although the temp circle shows up but no actual temp change when the **** is turned. I will give it a few days and see if it starts working. If not then maybe i will try to change the number to "0"