FORScan - software to enable/disable features in your truck
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by Livnitup
![](https://www.f150forum.com/images/buttons/viewpost.gif)
Try this in BCM:
726-27-01 0000 xxxx xxxx
if it still does it do this also (if you have 1 try 0 or vice versa):
726-27-02 xxxx xxxx x*xx Rear bulb turn outage cfg: 1=outage, 0=no outage
Edit: I did a guy's truck who was having similar issues and can't remember if one or both of the above solved it.
It's my first day
![Default](https://www.f150forum.com/images/icons/icon1.gif)
As far as I can tell, a 2017 Edge BCM is nearly identical to the 2017 F150. 2017 Edge owners manual says that auto re lock is enabled by default.
I grabbed the VIN from a 2017 Titanium Edge and compared it against the my 2017 F150. I tried nearly everything and still can't get auto relock to work, so I assume it might be IPC firmware related or I'm still missing something. I'm sharing my failure in case if someone else wants to run with it.
These are the addresses I tried changing to match the Edge:
720-01-01 > where auto relock is located in new IPC firmware
726-02-01 > Fob re trigger?
726-15-02 > relock cfg
726-21-01 > relock initial value
726-38-01 > the 2017 edge has a setting here that the 2017 F150 won't take, 2016 F150's also has a setting here which 2017 F150's won't take.
726-38-02 > various lock options
726-68-01 > various lock options
726-68-02 > various lock options
I grabbed the VIN from a 2017 Titanium Edge and compared it against the my 2017 F150. I tried nearly everything and still can't get auto relock to work, so I assume it might be IPC firmware related or I'm still missing something. I'm sharing my failure in case if someone else wants to run with it.
These are the addresses I tried changing to match the Edge:
720-01-01 > where auto relock is located in new IPC firmware
726-02-01 > Fob re trigger?
726-15-02 > relock cfg
726-21-01 > relock initial value
726-38-01 > the 2017 edge has a setting here that the 2017 F150 won't take, 2016 F150's also has a setting here which 2017 F150's won't take.
726-38-02 > various lock options
726-68-01 > various lock options
726-68-02 > various lock options
It's my first day
Senior Member
![](https://www.f150forum.com/images/badge/supporter.png)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I tried to pull a few Escapes and get the asbuilts for them, but no luck, for some reason the asbuilt website didn't like newer Escapes. What else uses a close version of the 2015-2016 F150's?
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
As far as I can tell, a 2017 Edge BCM is nearly identical to the 2017 F150. 2017 Edge owners manual says that auto re lock is enabled by default.
I grabbed the VIN from a 2017 Titanium Edge and compared it against the my 2017 F150. I tried nearly everything and still can't get auto relock to work, so I assume it might be IPC firmware related or I'm still missing something. I'm sharing my failure in case if someone else wants to run with it.
These are the addresses I tried changing to match the Edge:
720-01-01 > where auto relock is located in new IPC firmware
726-02-01 > Fob re trigger?
726-15-02 > relock cfg
726-21-01 > relock initial value
726-38-01 > the 2017 edge has a setting here that the 2017 F150 won't take, 2016 F150's also has a setting here which 2017 F150's won't take.
726-38-02 > various lock options
726-68-01 > various lock options
726-68-02 > various lock options
I grabbed the VIN from a 2017 Titanium Edge and compared it against the my 2017 F150. I tried nearly everything and still can't get auto relock to work, so I assume it might be IPC firmware related or I'm still missing something. I'm sharing my failure in case if someone else wants to run with it.
These are the addresses I tried changing to match the Edge:
720-01-01 > where auto relock is located in new IPC firmware
726-02-01 > Fob re trigger?
726-15-02 > relock cfg
726-21-01 > relock initial value
726-38-01 > the 2017 edge has a setting here that the 2017 F150 won't take, 2016 F150's also has a setting here which 2017 F150's won't take.
726-38-02 > various lock options
726-68-01 > various lock options
726-68-02 > various lock options
It's my first day
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by platinum99
Just wondering you stumbled on anything that will unlock all the doors when you put the truck in park?
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Hello,
My wife has a 2015 Expedition that came with Sync 2. I bought a Sync 3 from @TexasFording. He was great to do business with, the radio came in perfect shape, and other than the issues below, we have been pretty happy with everything else about it. It is leaps and bounds better than the Sync 2.
Long story longer, when you turn either of the dual zone AC *****, you can't tell what you're setting the temp to unless you're in the climate screen. On the raptor I have a little circle that pops up, on the screen, showing you what you're setting the temp to. Is this something I can enable in her new radio using the OBD 2 plug and Forscan? Here are my current APIM settings:
7D0-01-01 B222 0501 28DB
7D0-01-02 028B 0000 0A71
7D0-02-01 5553 0104 40C7
7D0-02-02 0200 8000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0003 00DE
7D0-04-01 0100 0800 0CF1
7D0-04-02 0002 DF
7D0-05-01 1A2C 1A40 2EAB
7D0-05-02 7C5A
7D0-06-01 805E
7D0-07-01 2200 3300 0034
7D0-07-02 0000 08EB 00D3
7D0-07-03 0056 569C 0029
7D0-07-04 7759
I wonder about:
7D0-01-01 xxxx xxx* xxxx Climate Front Zone & HD Radio: 3=Dual Zone & HD radio avail, 2=Dual Zone & HD radio not avail, 7=Single Zone & HD radio avail, 6=Single Zone & HD radio not avail
Mine is set to 1 (not an option listed on spreadsheet)
7D0-01-01 xxxx xxxx x*xx HSW & Heated/Cooled Seats: 3=Heated Seats only, 4=HSW climate screen only, 7=HSW & Heated Seats, 6=HSW & Heated & Cooled Seats, 5=HSW & Cooled Seats, 2=Heated & Cooled Seats, 1=Cooled Seats, 0=None
Mine is set to 8 (not an option listed on spreadsheet)
7D0-01-02 xxxx x*xx xxxx Climate Control Type: 2=Automatic, 6=Manual (or if controlled via hard buttons)
Mine is set to 0 (not an option listed on spreadsheet)
7D0-04-01 xxxx xxx* xxxx Climate: 0=enable Climate Control Repeater for Dual Climate Control, 1=disable CCR, 2=enable CCR for Single Climate Control, 3=disable CCR, 4=E8
Program
Mine is set to 0
The second thing I was hoping to get help with is the low fuel level warning. Her old Expedition and my Raptor both warn us when the fuel level gets to 50 miles left. Her Expedition doesn't let her know until 30. I was wondering if there was a way to change that using Forscan? Any suggestions?
Thanks.
Josh
My wife has a 2015 Expedition that came with Sync 2. I bought a Sync 3 from @TexasFording. He was great to do business with, the radio came in perfect shape, and other than the issues below, we have been pretty happy with everything else about it. It is leaps and bounds better than the Sync 2.
Long story longer, when you turn either of the dual zone AC *****, you can't tell what you're setting the temp to unless you're in the climate screen. On the raptor I have a little circle that pops up, on the screen, showing you what you're setting the temp to. Is this something I can enable in her new radio using the OBD 2 plug and Forscan? Here are my current APIM settings:
7D0-01-01 B222 0501 28DB
7D0-01-02 028B 0000 0A71
7D0-02-01 5553 0104 40C7
7D0-02-02 0200 8000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0003 00DE
7D0-04-01 0100 0800 0CF1
7D0-04-02 0002 DF
7D0-05-01 1A2C 1A40 2EAB
7D0-05-02 7C5A
7D0-06-01 805E
7D0-07-01 2200 3300 0034
7D0-07-02 0000 08EB 00D3
7D0-07-03 0056 569C 0029
7D0-07-04 7759
I wonder about:
7D0-01-01 xxxx xxx* xxxx Climate Front Zone & HD Radio: 3=Dual Zone & HD radio avail, 2=Dual Zone & HD radio not avail, 7=Single Zone & HD radio avail, 6=Single Zone & HD radio not avail
Mine is set to 1 (not an option listed on spreadsheet)
7D0-01-01 xxxx xxxx x*xx HSW & Heated/Cooled Seats: 3=Heated Seats only, 4=HSW climate screen only, 7=HSW & Heated Seats, 6=HSW & Heated & Cooled Seats, 5=HSW & Cooled Seats, 2=Heated & Cooled Seats, 1=Cooled Seats, 0=None
Mine is set to 8 (not an option listed on spreadsheet)
7D0-01-02 xxxx x*xx xxxx Climate Control Type: 2=Automatic, 6=Manual (or if controlled via hard buttons)
Mine is set to 0 (not an option listed on spreadsheet)
7D0-04-01 xxxx xxx* xxxx Climate: 0=enable Climate Control Repeater for Dual Climate Control, 1=disable CCR, 2=enable CCR for Single Climate Control, 3=disable CCR, 4=E8
Program
Mine is set to 0
The second thing I was hoping to get help with is the low fuel level warning. Her old Expedition and my Raptor both warn us when the fuel level gets to 50 miles left. Her Expedition doesn't let her know until 30. I was wondering if there was a way to change that using Forscan? Any suggestions?
Thanks.
Josh
Last edited by gijosh28; 03-06-2018 at 01:03 AM.
Senior Member
![](https://www.f150forum.com/images/badge/supporter.png)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Hello,
My wife has a 2015 Expedition that came with Sync 2. I bought a Sync 3 from @TexasFording. He was great to do business with, the radio came in perfect shape, and other than the issues below, we have been pretty happy with everything else about it. It is leaps and bounds better than the Sync 2.
Long story longer, when you turn either of the dual zone AC *****, you can't tell what you're setting the temp to unless you're in the climate screen. On the raptor I have a little circle that pops up, on the screen, showing you what you're setting the temp to. Is this something I can enable in her new radio using the OBD 2 plug and Forscan? Here are my current APIM settings:
7D0-01-01 B222 0501 28DB
7D0-01-02 028B 0000 0A71
7D0-02-01 5553 0104 40C7
7D0-02-02 0200 8000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0003 00DE
7D0-04-01 0100 0800 0CF1
7D0-04-02 0002 DF
7D0-05-01 1A2C 1A40 2EAB
7D0-05-02 7C5A
7D0-06-01 805E
7D0-07-01 2200 3300 0034
7D0-07-02 0000 08EB 00D3
7D0-07-03 0056 569C 0029
7D0-07-04 7759
I wonder about:
7D0-01-01 xxxx xxx* xxxx Climate Front Zone & HD Radio: 3=Dual Zone & HD radio avail, 2=Dual Zone & HD radio not avail, 7=Single Zone & HD radio avail, 6=Single Zone & HD radio not avail
Mine is set to 1 (not an option listed on spreadsheet)
7D0-01-01 xxxx xxxx x*xx HSW & Heated/Cooled Seats: 3=Heated Seats only, 4=HSW climate screen only, 7=HSW & Heated Seats, 6=HSW & Heated & Cooled Seats, 5=HSW & Cooled Seats, 2=Heated & Cooled Seats, 1=Cooled Seats, 0=None
Mine is set to 8 (not an option listed on spreadsheet)
7D0-01-02 xxxx x*xx xxxx Climate Control Type: 2=Automatic, 6=Manual (or if controlled via hard buttons)
Mine is set to 0 (not an option listed on spreadsheet)
7D0-04-01 xxxx xxx* xxxx Climate: 0=enable Climate Control Repeater for Dual Climate Control, 1=disable CCR, 2=enable CCR for Single Climate Control, 3=disable CCR, 4=E8
Program
Mine is set to 0
The second thing I was hoping to get help with is the low fuel level warning. Her old Expedition and my Raptor both warn us when the fuel level gets to 50 miles left. Her Expedition doesn't let her know until 30. I was wondering if there was a way to change that using Forscan? Any suggestions?
Thanks.
Josh
My wife has a 2015 Expedition that came with Sync 2. I bought a Sync 3 from @TexasFording. He was great to do business with, the radio came in perfect shape, and other than the issues below, we have been pretty happy with everything else about it. It is leaps and bounds better than the Sync 2.
Long story longer, when you turn either of the dual zone AC *****, you can't tell what you're setting the temp to unless you're in the climate screen. On the raptor I have a little circle that pops up, on the screen, showing you what you're setting the temp to. Is this something I can enable in her new radio using the OBD 2 plug and Forscan? Here are my current APIM settings:
7D0-01-01 B222 0501 28DB
7D0-01-02 028B 0000 0A71
7D0-02-01 5553 0104 40C7
7D0-02-02 0200 8000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0003 00DE
7D0-04-01 0100 0800 0CF1
7D0-04-02 0002 DF
7D0-05-01 1A2C 1A40 2EAB
7D0-05-02 7C5A
7D0-06-01 805E
7D0-07-01 2200 3300 0034
7D0-07-02 0000 08EB 00D3
7D0-07-03 0056 569C 0029
7D0-07-04 7759
I wonder about:
7D0-01-01 xxxx xxx* xxxx Climate Front Zone & HD Radio: 3=Dual Zone & HD radio avail, 2=Dual Zone & HD radio not avail, 7=Single Zone & HD radio avail, 6=Single Zone & HD radio not avail
Mine is set to 1 (not an option listed on spreadsheet)
7D0-01-01 xxxx xxxx x*xx HSW & Heated/Cooled Seats: 3=Heated Seats only, 4=HSW climate screen only, 7=HSW & Heated Seats, 6=HSW & Heated & Cooled Seats, 5=HSW & Cooled Seats, 2=Heated & Cooled Seats, 1=Cooled Seats, 0=None
Mine is set to 8 (not an option listed on spreadsheet)
7D0-01-02 xxxx x*xx xxxx Climate Control Type: 2=Automatic, 6=Manual (or if controlled via hard buttons)
Mine is set to 0 (not an option listed on spreadsheet)
7D0-04-01 xxxx xxx* xxxx Climate: 0=enable Climate Control Repeater for Dual Climate Control, 1=disable CCR, 2=enable CCR for Single Climate Control, 3=disable CCR, 4=E8
Program
Mine is set to 0
The second thing I was hoping to get help with is the low fuel level warning. Her old Expedition and my Raptor both warn us when the fuel level gets to 50 miles left. Her Expedition doesn't let her know until 30. I was wondering if there was a way to change that using Forscan? Any suggestions?
Thanks.
Josh
7D0-01-01 xxxx xxxx x3xx
7D0-01-02 xxxx x2xx xxxx
7D0-04-01 xxxx xxx0 xxxx, that is what I used to get the temperature to show on the screen when changing it.
I upgraded from sync 1 to sync 3, and a Lariat bezel. So this is what I have for settings.
The fuel level thing as far as I know it has not been discovered yet.
Last edited by Gordy49913; 03-06-2018 at 10:46 AM.
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I was reading on the Super Duty forum and came across their FORScan spread sheet. Most of it matches our, but when I read about the Global Window Open/Close FOB sequence it was different. All the coding is the same, but to open, press the unlock once and release then hold down the unlock and in 5 seconds the windows will open. To close just hold down the lock and in 5 seconds they closed. I tried it out and it works fine. It sure beats the lock, unlock, lock, unlock then hold the button down.
The following users liked this post:
jayb79 (03-06-2018)
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I was reading on the Super Duty forum and came across their FORScan spread sheet. Most of it matches our, but when I read about the Global Window Open/Close FOB sequence it was different. All the coding is the same, but to open, press the unlock once and release then hold down the unlock and in 5 seconds the windows will open. To close just hold down the lock and in 5 seconds they closed. I tried it out and it works fine. It sure beats the lock, unlock, lock, unlock then hold the button down.
That is a great find!! Beats abusing the door locks all the time lol!!
Now to get my damn Reverse mirrors working correctly--I would be happy hahahaha
The following users liked this post:
jayb79 (03-06-2018)