FORScan - software to enable/disable features in your truck
It's my first day
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by Firerunner
JMO, but from what I understand the Harley edition is being built by Tuscany - without Fords input...So unless Tuscany is changing something in the sound processor it will still sound the same as all other F150's
https://www.autoevolution.com/news/f...r-128282.html#
https://www.autoevolution.com/news/f...r-128282.html#
Frelling idiot member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Well then, if you're sure about that, then my BMS is definitely still active while auto stop start disabled.
I'm still uncertain around BMS, because it is unclear to me at what point the Sync Connect (AT&T cellular remote start modem) should supposedly automatically shutdown under battery drain.
Normal 12V systems will automatically be switched off after a long period of time, but Sync connect is always drawing current and I'm just not sure what typical behaviour of that system should be.
I'm still uncertain around BMS, because it is unclear to me at what point the Sync Connect (AT&T cellular remote start modem) should supposedly automatically shutdown under battery drain.
Normal 12V systems will automatically be switched off after a long period of time, but Sync connect is always drawing current and I'm just not sure what typical behaviour of that system should be.
Denver
Last edited by DCM; 10-10-2018 at 01:03 AM.
Senior Member
![](https://www.f150forum.com/images/ranks/veteran_marine_corp.png)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Forscan.org indicates to set the sync version to V3 in profile for 2015+, but myFord Touch is not sync 3. Can someone confirm if we should actually set the Forscan profile to V3 for all 2015's or just for sync3 systems.
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
7D0-02-01 5753 xxxx xxxx = Nav input while in motion
714-02-01 0264 6464 xxxx = Max steering wheel heat
714-02-01 0264 6464 xxxx = Max steering wheel heat
which modual for the navigation change?
![Default](https://www.f150forum.com/images/icons/icon1.gif)
+1 on how to get rid of the 4 chimes when turning the truck on. That sound is super annoying.
Also, I did the change to enable engine oil life remaining, but it doesn’t seem to work. I have a 2018 Lariat 502A. Engine info just displays hours and idle hours. Does that work for anyone else?
Also, I did the change to enable engine oil life remaining, but it doesn’t seem to work. I have a 2018 Lariat 502A. Engine info just displays hours and idle hours. Does that work for anyone else?
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Nope. My truck does the same and I have all the belt minders killed. Only thing to do (so far) is to buckle up before starting.
The FORScan Guy
![](https://www.f150forum.com/images/badge/supporter.png)
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Just went out and put my testing hat on and found that this disables the three "doo-doo-doo" chimes when turning the truck on.
IPC 720-01-02 xxxx x2xx
This works on my '16 (with an '18 cluster installed) so once some more people confirm this I'll add it to the common spreadsheet![Thumbsup](https://www.f150forum.com/images/smilies/thumbsup.gif)
Note: test this with the door closed so you don't hear the door ajar warning chime and think this doesn't work.
IPC 720-01-02 xxxx x2xx
This works on my '16 (with an '18 cluster installed) so once some more people confirm this I'll add it to the common spreadsheet
![Thumbsup](https://www.f150forum.com/images/smilies/thumbsup.gif)
Note: test this with the door closed so you don't hear the door ajar warning chime and think this doesn't work.
Last edited by Livnitup; 10-10-2018 at 04:19 PM.
The following 6 users liked this post by Livnitup:
carrierj (10-21-2018),
Garnet (10-13-2018),
Lare (10-13-2018),
Professor Wizard (10-10-2018),
robbieg (10-10-2018),
and 1 others liked this post.