Originally Posted by breakers28

If you cannot see all the modules (there are about 18 Modules in all, but you need the DDM, PDM and BCM as I recall for this change), delete the profile in FORScan and let it rescan and to find all modules next time you connect. You should be able to see the DDM and PDM modules in FORScan. And if you are using the bbfly ODBII Scan tool, make sure you flip the switch as needed so all modules will be found. I can confirm this feature works on my XLT 302A package. As long as you have one button up/down windows, it should work.


Just to confirm this can be done on an XLT with 302A.

Originally Posted by L1M1T3D

I have a 2016 Limited
Front Camera is disabled by Factory. What will enabling it do?

Originally Posted by L1M1T3D

Yes, I have a front camera. What will it do?

Originally Posted by Tippman7641

On 2017 Super Duty you can enable the full brightness of the LED accent "[" "]" lights by making the following changes. I have confirmed this code works on 7 different (superduties) including my own. This enable them to run in full brightness when the parking lights are on, remote start is on, the headlight switch is in the headlights on position, the headlight switch is in the auto position with the headlights off(day time), and when the headlight switch is in the auto position and the headlights are on(night time)

This has been confirmed to work on two F-150s as well as other ford models as well. I did not see it in this in the F-150 or superduty spread sheets

Bcm(As-Built)
726-29-02:
0000 0001 0051
Change to:
x1xx xxxx xxxx

Some trucks may have different values in the other postions, but we have found changing the digit above to a "1" will allow the change regardless

The first two photos are of the headlight switch in the parking postion and headlight on postion BEFORE the change. The second two photos are with the headlight switch in the parking position and on position AFTER the change

Originally Posted by KrS14

Seems I'm going to have to disable my auto folding mirrors.

There's snow and ice build up when they're folded and they won't unfold when I leave in the morning Don't want to hurt gears or anything.

Oh well, I'll turn it back on in the spring.

Originally Posted by F150CMH

Originally Posted by Airborne_Ape

If you enable the front camera in ForScan it will enable the front camera video feed in Sync 3 as you select through the video inputs by pressing the 360 camera button on the dash multiple consecutive times when traveling at low speed or stopped.

I can't remember, but I thought the dedicated front camera button only started in the 2017 model year.

Disabling the front camera in ForScan disables the front camera input into the video processing module and I'm nearly certain it also disables the self parking assist and the 360 view at the same time depending on what value you choose.

Originally Posted by DCM

I'm wondering what the reasoning was for not making them full brightness. Usually there's a reason. Maybe something in the halo's power feed doesn't live very long at the higher power output?

Originally Posted by DCM

I'm wondering what the reasoning was for not making them full brightness. Usually, there's a reason. Maybe something in the halo's power feed doesn't live very long at the higher power output?

Originally Posted by Firerunner

lol...find the mustang, always wanted a muscle car (truck)!

Originally Posted by 60carlover