mattd17

is there an easy way to do this without returning the DDM and PDM modules completely back to As Built? I have the AB files saved, but not written down so I don't know what to change just to update this feature without changing everything else which uses the 'new" settings for those modules.

not a big deal to revert back to AB and then reconfigure if needed.

maybe I will revert to AB, then create a file for "winter" settings and another for "summer" settings. Is this what you do?

kilthro

One thing i did when i forgot to take a snipit (screen print of the changes).. I knew what field references I changed. (the ones from the excel file) I just loaded up forscan, went into that module loaded all from the original saved file, went to those specifice ranges that were changed and took a screen shot of them.. or you can write them down.. then all you need to do is exit out of forscan without writing and you have your data and you didnt write them back over to the truck..

Also yes if you are going to be changing regularly, its much faster and easier to make/keep two sets for quick flashing back and forth. The only cumbersome process is if you make addtional changes, you will need to make sure you make them to both sets and resave the file.

Mlarv

I wrote down the values before I started just in case I messed up. When the winter hit and they started to mess up with the cold I just went back to the values I wrote down. I have not put them back to auto fold again because it is not really needed around where I normally drive. Look at the spread sheet and see what fields where changed. Go to your back up and open it in wordpad and look at those fields to see what the used to be write them down and there ya go.

72raider

i just bought a new to me 2018 lariat, went from a 2016 platy. hooked the new truck up to forscan and get error message, unable to identify vehicle, please contact developers. any ideas

soaringfalcon

iTrader: (1)

Are you running the latest version of Forscan?
You might have an older version that does not have the 2018 signature in it.

I recommend that you update Forscan to the latest version from the website and try again.

DuneRunr

Firerunner

iTrader: (3)

When I changed my tires from 18s to 20s I had to perform the PCM Module Initialization/relearn vehicle data to clear the persistent DTC on my truck

72raider

yep, thats what it was, thanks

KennyCJR

iTrader: (3)

Livnitup

Yes, once you set that to "no cancel" then after initially turning on the fogs with the headlights in the Auto position then the fogs should come on with the low beams on all subsequent instances unless you manually turn them off or use the high beams (if you don't have bambi mode set).