LA_F150

lol yes 5753 - i fat fingered that on my phone.... anyway it looks like my 3.4 upgrade only includes voice files for American English. I guess 3.3 had more language files available such as UK etc. I don't have nav but am hoping 5753 allows me to access the music library via carplay while driving. right now it locks me out to only select "recently played".

defender007

I tried it on mine but I don’t think it works with nav in motion

fordpiper

It is the only time it shows up on my 2019 but I'm sure there is code that could be changed as the speed limit is displayed on your Sync display with Nav page or home with small nav page without having it set for navigating.

LA_F150

ok! did some testing with the EQ settings. keep in mind this is with a late 2019 build ACM (K series) that is self amplified with SiriusXM and HD Radio, truck has the base 7 speaker non sony system. the center speaker is disabled. No sub.

EQ setting "1" sounds good. it is balanced and slightly cuts down bass signal from front speakers. it is also a bit muted on highs. this is the factory setting for this specific ACM.
EQ "0" was very reduced on rear speaker sound. it cuts them down to more of a midbass, and the output volume is greatly reduced.
EQ 2,3,4 are similar on the reduced rear sound output, it just does not sound right to me
EQ 5, 7 and 8 are all decent. it is similar to 1 but I would say each has a bit more midrange gain. it is worth trying. I would say 5 is closest to 1 but slightly more mid.
EQ 9 has the most overall sound output. it is full bass to fronts and significantly more upper range to rears along with bass. fronts are very bright and not attenuated like 1 is. If I were running aftermarket speakers of better quality / sensitivity I'd want to try this setting. it definitely has more midrange gain as well.

conclusion, i need to see how each sounds while driving, but I would lean towards using 1, 5, 9 or 8 as first choices. I think 1 is the "cleanest" to full volume even with treble slider all the way up, mid slider 2/3 of the way up, and bass slider 3/4 of the way up. add a sub to this and perfect.

I think 8 is like 1 but with more midrange gain. it will clip at full volume and with bass/mid/treble settings turned up.

9 is the most raw output and to me this seems like a full range setting. it will definitely clip into max vol. it has the most "thump" hands down. and the most treble. i might suggest that the distortion towards max has something to do with the crap stock speakers, they have poor db sensitivity and are not optimal. will test when i install new speakers. I would bet that installing decent Focal or other good brand with 92db sensitivity, 50w-75w max rating would be louder at lower setting point on the volume wheel, and with less distortion / ringing.

For the F/R fader settings I have found that fading towards rear 1 or 2 clicks is optimal for front seating position and gives better blend between the fronts and rears, warms up the sound and adds bass without needing to bump the bass slider towards max.

If you really want to hear the differences, when you test each one put the fader all the way to rear. that is where I was hearing a lot of change. 9 makes the biggest change on the fronts in ref to not attenuating bass / treble.

LA_F150

Got my center stack display up and working. cool stuff ;-) a couple of things displaying but not operational. i do have these features enabled in my truck, and hard buttons for decent control, traction control. any ideas on what I am missing in settings? I did reset the APIM afterwards.

control is grayed out, or control does not work when pressing it

Hill descent control - grayed out, pressing it does nothing
Auto S/S - active but control does not work. it shows "on" but i actually have this set to disabled in BCM. maybe that is what is messing it up?
Traction control - grayed out, pressing it does nothing
Remote Start setup: Climate Control "auto / last" selections are grayed out and neither one shows selected.However, 'duration' and 'activate remote start' both work

7D0-08-01 1006 0000 0066
7D0-08-02 0100 0700 10F9
7D0-09-01 05B0 0C08 A008
7D0-09-02 1030 0008 2345
7D0-09-03 0000 0000 0023
7D0-09-04 0000 0000 0064

tmtex

Anyone know what this means ?

neilc1

I'm guessing you picked from the menu box at the bottom of the forscan programming screen,
go to log tab up top and find your way in from there.

I just had to re remember this today , , ,

LA_F150

odd- what are all these extra data rows in the ACM when exporting AB from Forscan? this is from the 2019 K series ACM. these rows do not show up in forscan asbuilt config editor, but they are written out when I do a 'save all'. I edited the "G" to a "0" and inserted a space for easier reading. I'm using the latest build of Forscan.

ACM 727
;Block 1
7270101 1001180A91F4
7270102 0105FF000036
7270103 000000600092
;Block 2
7270201 5B8C
;Block 3
7270301 1446
;Block 4
7270401 0000005553DB
;Block 5
7270501 0012006C00B2
7270502 C60120017A97
7270503 01D4022E023D
7270504 8802E2033CE2
7270505 039603F004C8
7270506 4A0012006C01
7270507 00C601200122
7270508 7A01D4022EBA
7270509 028802E203AD
727050A 3C039603F00B
727050B 044A001200A4
727050C 6C00C6012098
;Block 6
7270601 01C602011615
7270602 020116020152
7270603 8E0201B2007A
7270604 01C602023E41
7270605 000246020285
7270606 6200026A0008
7270607 0162000112B1
7270608 00013A000178
7270609 5A00016E0006
727060A 01BA0001C2C2
727060B 0001EA000131
727060C 1600017E00DB
727060D 00FA02016EB2
727060E 0001C200010C
727060F 3A00026A00EF
72706H0 01BA0001EEF4
72706H1 00023E00018C
72706H2 EA00010E0045
;Block 7
7270701 0008002E006C
7270702 10000D002C80
7270703 005B004900DC
7270704 970037007A81
7270705 000D002C0073
7270706 5B00490009E8
7270707 0012003E008C
7270708 73002600C399
7270709 000900120059
727070A 3E00730008FE
727070B 002E00100084
727070C 97008C0052BC
;Block 8
7270801 404182034481
7270802 85064788099B
7270803 4A8B0C4D8EF5
7270804 0F509112538F
7270805 9415569718E9
7270806 599A1B5C9D43

EZE

Are the EQ adjustments available in the 2016 Lariat, SYNC 3, No Sony?

elptxjc

Is there a way to add EQ settings to Sync3 (B&O system) on my 2018 Platinum? I don't want to mess with Sync 3.4, since I'd void the warranty, and my APIM already acted out once, so it's possible to have issues again. Don't think so, but just in case . Thank you.