FORScan - software to enable/disable features in your truck
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Sorry what I meant was that I changed the APIM so I can enter addresses while driving and it uses the UK signage my speed limit is in a red circle maybe that’s why it doesn’t show up in the cluster
It's my first day
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I'm tempted to test the EPAS ratio setting in the ABS module now that it's been mapped out.
Since I first test drove a 2016 F150, EPAS is one of the top forced-on features that's easy for me to hate.
760-02-01: xxx* xxxx xxxx
1 = EPAS ratio 17:1
2 = EPAS ratio 1:1
Since I first test drove a 2016 F150, EPAS is one of the top forced-on features that's easy for me to hate.
760-02-01: xxx* xxxx xxxx
1 = EPAS ratio 17:1
2 = EPAS ratio 1:1
Last edited by Airborne_Ape; 04-30-2020 at 12:39 AM.
![Default](https://www.f150forum.com/images/icons/icon1.gif)
EQ adjustments will be in the ACM module config of forscan, check the current spreadsheet under ACM tab, 727-01-02 x*xx xxxx xxxx
https://docs.google.com/spreadsheets...#gid=338817466
After you write the change in Forscan and do the key off / on, the ACM will reset with the new setting. Choose a quality audio source and re apply your bass/mid/treble/fader settings as those get reset as well.
https://docs.google.com/spreadsheets...#gid=338817466
After you write the change in Forscan and do the key off / on, the ACM will reset with the new setting. Choose a quality audio source and re apply your bass/mid/treble/fader settings as those get reset as well.
![Default](https://www.f150forum.com/images/icons/icon1.gif)
You are not really adding anything and this should apply to all versions of Sync3. You are just changing what the asbuilt data has set for your specific vehicle and system. this setting is (IMO) more of a baseline interior EQ calibration which is supposed to give optimal sound for the speaker placements in the vehicle. But the term "optimal sound" is always a subjective item, as every set of ears hears things differently. me personally, my upper range hearing is shot from too many years of fun with things that are loud. so i like my system a bit brighter than most.
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Do any of you F150 masters know what these are and where they are physically located? this setting is bugging me because I have vins from several different 2019/2020 F150 trucks of similar config as mine, and they have different settings in the APIM. Some are set at 7, some are set at B. My 2018 asbuilt was set at 4. Almost all 2018 asbuilts I have looked at have 4 for their respective Sync3 APIM, but of course I love to complicate things and shove newer components into my vehicle. lol
Internal Gyro (IG) & Gyro on Bus (GoB) 7D0-06-01 *xxx
I have tried different settings and not seen any difference- What breaks if this is set wrong and what dictates one being present or not from vehicle to vehicle?
Internal Gyro (IG) & Gyro on Bus (GoB) 7D0-06-01 *xxx
I have tried different settings and not seen any difference- What breaks if this is set wrong and what dictates one being present or not from vehicle to vehicle?
It's my first day
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Do any of you F150 masters know what these are and where they are physically located? this setting is bugging me because I have vins from several different 2019/2020 F150 trucks of similar config as mine, and they have different settings in the APIM. Some are set at 7, some are set at B. My 2018 asbuilt was set at 4. Almost all 2018 asbuilts I have looked at have 4 for their respective Sync3 APIM, but of course I love to complicate things and shove newer components into my vehicle. lol
Internal Gyro (IG) & Gyro on Bus (GoB) 7D0-06-01 *xxx
I have tried different settings and not seen any difference- What breaks if this is set wrong and what dictates one being present or not from vehicle to vehicle?
Internal Gyro (IG) & Gyro on Bus (GoB) 7D0-06-01 *xxx
I have tried different settings and not seen any difference- What breaks if this is set wrong and what dictates one being present or not from vehicle to vehicle?
Using the wrong settings has the ability to potentially break the compass in the IPC or APIM depending on which vehicle has which hardware. That's why you observed many different F150's with different configurations.
You will have to map out exactly which VINs have exactly which options you are trying to evaluate, rather than randomly guess at F150 data simply because they are the same model.
![Default](https://www.f150forum.com/images/icons/icon1.gif)
When you asked the same question two days ago I responded in post #22186. You'll see that variance depending on which vehicles have a GPSM, Factory nav or no factory Nav and how it is implemented.
Using the wrong settings has the ability to potentially break the compass in the IPC or APIM depending on which vehicle has which hardware. That's why you observed many different F150's with different configurations.
You will have to map out exactly which VINs have exactly which options you are trying to evaluate, rather than randomly guess at F150 data simply because they are the same model.
Using the wrong settings has the ability to potentially break the compass in the IPC or APIM depending on which vehicle has which hardware. That's why you observed many different F150's with different configurations.
You will have to map out exactly which VINs have exactly which options you are trying to evaluate, rather than randomly guess at F150 data simply because they are the same model.
For me, it would be helpful to know where the IG and GoB physically reside in the vehicle and if presence or exclusion of each module (IG or GoB) is dependent on specific hardware present. Does the model number of the APIM/ACM/Screen hardware help narrow it down? Does the IG and GoB hardware reside in, and presence of each change with, the replacement of the APIM/ACM/Screen - or do IG / GoB live in other modules? Hope that makes sense. As always, I appreciate your time and knowledge.
Last edited by LA_F150; 04-29-2020 at 02:36 AM.
The FORScan Guy
![](https://www.f150forum.com/images/badge/supporter.png)
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
3. This is related to several settings in the SCCM which have not been mapped out yet and ECU drive open logic in the BCM at 726-45-02 x0xx xxxx xxxx which appears to be disabled on XL's & low-tier XLT's by default.
4. Figure out what APIM 7D0-02-03: xxx5 xx does and why is it enabled on Ford's with Sync Connect by default.
5. Set APIM 7D0-03-01: xxxx x6xx xxxx and then test for new additional themes in other memory addresses. (Sync 3.4 only)
6 = 8" Sync 3.4
7 = 10" Horizontal Sync 3.4
8 = 10" Vertical Sync 3.4
4. Figure out what APIM 7D0-02-03: xxx5 xx does and why is it enabled on Ford's with Sync Connect by default.
5. Set APIM 7D0-03-01: xxxx x6xx xxxx and then test for new additional themes in other memory addresses. (Sync 3.4 only)
6 = 8" Sync 3.4
7 = 10" Horizontal Sync 3.4
8 = 10" Vertical Sync 3.4
4. 7D0-02-03: xxx* xx - BT Pairing Timeout (s)
5. updated descriptions but nothing that wasn't previously known
The following users liked this post:
Airborne_Ape (04-30-2020)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
For KL3T series ACM, the following settings work for the CD & MP3 text conversion settings. The present settings in forscan spreadsheet do not work with the 2019+ ACM hardware
727-01-01 xxxx xxx* xxxx
CD & MP3 CD Text Conversion
8=Internal CD enabled, External CD disabled. I think this also does MP3 Text conversion disabled but not sure
A=Internal CD disabled, External CD enabled, MP3 Text conversion disabled
B=MP3 Text Conversion enabled as it's own specific bit value
727-01-01 xxxx xxx* xxxx
CD & MP3 CD Text Conversion
8=Internal CD enabled, External CD disabled. I think this also does MP3 Text conversion disabled but not sure
A=Internal CD disabled, External CD enabled, MP3 Text conversion disabled
B=MP3 Text Conversion enabled as it's own specific bit value
Last edited by LA_F150; 04-29-2020 at 03:25 AM.
![Default](https://www.f150forum.com/images/icons/icon1.gif)
For 2019+ F150 XLT, this setting defines the internal gyro type for the vehicle, depending on whether a nav APIM or a non-nav APIM is installed. Anyone swapping from a non nav to a nav APIM should be sure to flip this bit to the proper value. The current Forscan spreadsheet has correct bit value data for these field values in ref to 2019+. The below info is to help explain why each value is used. It would seem the IG resides inside the nav APIM, and a non nav APIM likely uses a gyro located within another module- perhaps the IPC. I do not know.
7D0-06-01 *xxxx
2019+ vehicle without ambient lighting
7=IG not present, GoB present, ALT Single Color, RG New (NON NAV APIM)
B=IG present, GoB not present, ALT Single Color, RG New (NAV APIM) ** I have seen one asbuilt that used "A" here, seems highly uncommon but does exist.
2019+ vehicle with ambient lighting
5=IG not present, GoB present, ALT Pantone, RG New (NON NAV APIM)
9=IG present, GoB not present, ALT Pantone, RG New (NAV APIM)
2018 and earlier vehicle without ambient lighting
6=IG not present, GoB present, ALT Single Color, RG Legacy (NON NAV APIM) ** I have seen several 2018 asbuilts that use "4" here, even if they do not have Ambient Lighting
A=IG present, GoB not present, ALT Single Color, RG Legacy (NAV APIM)
2018 and earlier vehicle with ambient lighting
4=IG not present, GoB present, ALT Pantone, RG Legacy (NON NAV APIM)
8=IG present, GoB not present, ALT Pantone, RG Legacy (NAV APIM)
7D0-06-01 *xxxx
2019+ vehicle without ambient lighting
7=IG not present, GoB present, ALT Single Color, RG New (NON NAV APIM)
B=IG present, GoB not present, ALT Single Color, RG New (NAV APIM) ** I have seen one asbuilt that used "A" here, seems highly uncommon but does exist.
2019+ vehicle with ambient lighting
5=IG not present, GoB present, ALT Pantone, RG New (NON NAV APIM)
9=IG present, GoB not present, ALT Pantone, RG New (NAV APIM)
2018 and earlier vehicle without ambient lighting
6=IG not present, GoB present, ALT Single Color, RG Legacy (NON NAV APIM) ** I have seen several 2018 asbuilts that use "4" here, even if they do not have Ambient Lighting
A=IG present, GoB not present, ALT Single Color, RG Legacy (NAV APIM)
2018 and earlier vehicle with ambient lighting
4=IG not present, GoB present, ALT Pantone, RG Legacy (NON NAV APIM)
8=IG present, GoB not present, ALT Pantone, RG Legacy (NAV APIM)
Last edited by LA_F150; 04-29-2020 at 10:10 AM.