FORScan - software to enable/disable features in your truck
The following 2 users liked this post by neilc1:
DCM (09-27-2020),
Riley's Ride (09-27-2020)
09-27-2020, 10:57 AM
09-27-2020, 12:04 PM
has left the building
FYI: Global windows in the F150 only operates the front doors. All models and years (as far as I know). I have not read one report stating the rear windows will function this way (even those with all the fancy buttons).
09-27-2020, 08:29 PM
Frelling idiot member
Has anyone figured out the front camera 360 lockout issue? I would love to change this setting to something higher than the 5MPH it seems now. I just picked up my first F150 and I would love to change this setting! Also; this group is awesome! So many great ideas - and so much time to document and share with others!
09-27-2020, 08:32 PM
Frelling idiot member
No fan?
No temperature control?
Dual controls or single?
Year and trim level of truck?
Mods you have already done that worked or didn't work?
09-27-2020, 11:05 PM
2020 Sport
Not sure what I did guys but heres the story....I used forscan to change the following things and some how I ended up disabling cruise control. Non of my cruise buttons work and they did before. Its a 2020 XLT 4x4 Sport. Heres the mods I did:
Does any of these touch cruise control in a 2020?
Global Window Open/Close
BCM 726-17-01 0101 0101 014A
BCM 726-17-02 0101 0101 014B
BCM 726-30-01 0101 xxxx xxxx
DDM 740-05-01 Dxxx xx
PDM 741-05-01 Dxxx xx
Double Horn Honk disable
BCM 726-41-02 xxx0 xxxx xxxx
Bambi mode
BCM 726-27-01 xxxx xxx0 xxxx
Disables Door Ajar warning chime
IPC 720-01-02 xx0x xxxx
Turn Signal Flashes (# of) - did A for 5 flashes
SCCM 724-01-01 xxxx x*xx xx
Disables three "doo-doo-doo" start-up chimes from cluster
IPC 720-01-02 xxxx x2xx
Fixed Hyperflash
BCM 726-27-01 x0xx xxxx xxxx
BCM 726-27-02 xxxx xxxx x0xx
BCM 726-17-01 0101 0101 014A
BCM 726-17-02 0101 0101 014B
BCM 726-30-01 0101 xxxx xxxx
DDM 740-05-01 Dxxx xx
PDM 741-05-01 Dxxx xx
Double Horn Honk disable
BCM 726-41-02 xxx0 xxxx xxxx
Bambi mode
BCM 726-27-01 xxxx xxx0 xxxx
Disables Door Ajar warning chime
IPC 720-01-02 xx0x xxxx
Turn Signal Flashes (# of) - did A for 5 flashes
SCCM 724-01-01 xxxx x*xx xx
Disables three "doo-doo-doo" start-up chimes from cluster
IPC 720-01-02 xxxx x2xx
Fixed Hyperflash
BCM 726-27-01 x0xx xxxx xxxx
BCM 726-27-02 xxxx xxxx x0xx
09-27-2020, 11:06 PM
Senior Member
The F150's do not have door modules controlling the back windows, they are powered directly by the switches, so only the front windows are global.
09-27-2020, 11:50 PM
has left the building
Not sure what I did guys but heres the story....I used forscan to change the following things and some how I ended up disabling cruise control. Non of my cruise buttons work and they did before. Its a 2020 XLT 4x4 Sport. Heres the mods I did:
Does any of these touch cruise control in a 2020?
Does any of these touch cruise control in a 2020?
First solution is to back up YOUR work. Restore all the backup asbuilts then see if cruise works. If not, restore YOUR backups of YOUR changes and carry on with further troubleshooting.
Do you have working brake lights? I guess I could take a stab and say the hyperflash may cause a problem. If your brake lights aren't working properly, cruise won't work. Start with brake lights first. Then restore the stock values for the BCM hyperflash adjustments.
ProTip:
Choose to restore the BCM asbuilt (that will change all data back to default). However, only select write on the item you changed...that will leave any other changed items you have made to the BCM unaltered by the restore. Alternatively, you choose "write all" which will overwrite all of your BCM values instead of ony writing on the module you wish to revert back to.
09-28-2020, 01:50 AM
Senior Member
temp control goes from Cold to well Cold
Single Control
2018 XL STX
Forscan Wise I've done Bambi Disabled auto start/stop, disabled almost all chimes minus key in ignition Mod wise I added 8" digital cluster and added factory Navigation.
Thanks. I know I didn't provide much detail because I figured it wasn't probable and it wasn't it is definitely and blend door. I replaced with a dorman and have heat now but still throwing a code so I ordered a motor off tasca and will swap it out to see if that fixes it.
The following users liked this post:
DCM (09-28-2020)
09-28-2020, 08:47 AM
2020 Sport
I don't pretend to be a module expert so I can't say if any of your changes would have altered it.
First solution is to back up YOUR work. Restore all the backup asbuilts then see if cruise works. If not, restore YOUR backups of YOUR changes and carry on with further troubleshooting.
Do you have working brake lights? I guess I could take a stab and say the hyperflash may cause a problem. If your brake lights aren't working properly, cruise won't work. Start with brake lights first. Then restore the stock values for the BCM hyperflash adjustments.
ProTip:
Choose to restore the BCM asbuilt (that will change all data back to default). However, only select write on the item you changed...that will leave any other changed items you have made to the BCM unaltered by the restore. Alternatively, you choose "write all" which will overwrite all of your BCM values instead of ony writing on the module you wish to revert back to.
First solution is to back up YOUR work. Restore all the backup asbuilts then see if cruise works. If not, restore YOUR backups of YOUR changes and carry on with further troubleshooting.
Do you have working brake lights? I guess I could take a stab and say the hyperflash may cause a problem. If your brake lights aren't working properly, cruise won't work. Start with brake lights first. Then restore the stock values for the BCM hyperflash adjustments.
ProTip:
Choose to restore the BCM asbuilt (that will change all data back to default). However, only select write on the item you changed...that will leave any other changed items you have made to the BCM unaltered by the restore. Alternatively, you choose "write all" which will overwrite all of your BCM values instead of ony writing on the module you wish to revert back to.
Yeah brake lights work, turn signals etc etc all work. Everything works as normal. I'll give a shot and revert everything I did. I just figured Id ask if any of those changes were related to cruise control. I know the only thing I had hard time findinng was hyperflash and I found a few different videos online that changed different sections so I went with the majority and changed those 2 lines which did fix the hyperflash.