FORScan - software to enable/disable features in your truck
#4121
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by bhamilton
Post #1 of this very thread ![Glare](https://www.f150forum.com/images/smilies/glare.gif)
![Glare](https://www.f150forum.com/images/smilies/glare.gif)
The following users liked this post:
Scott91370 (12-13-2016)
#4122
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Still get hyper-flash, and I'm getting DTCs for all my front lights (Low beam, Fog, Turn and Parking). No DTCs for rear lights.
Front turn/parking have resistors on the LEDs. Rears do not.
#4123
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I did the mirror tilt down w/reverse feature on my 16 Lariat Screw 5.0 and they now go crazy when I select one or the other and put the truck in reverse. The mirror itself appears to go to it's outer limits in a counter clockwise motion. I have memory mirrors and entered all the codes correctly, but they both do the same thing no matter which one is selected. Auto-fold mirrors and global windows work perfectly though!
#4124
Senior Member
![](https://www.f150forum.com/images/badge/supporter.png)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Has anyone that has sync 3 v2.0 or v2.2 changed the splash screen bits to see if there are any new ones? I saw a U.K. Post that had RS
#4125
Senior Member
iTrader: (1)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I have it on good authority that Santa is bringing the OBD interface module, so looking forward to playing with all these tweaks before too long..... just picked up a CPO 2016 Explorer Limited for my wife (Sync 2) so looking forward to seeing what we can tweak there as well.... killing the double-beep is certainly on the list...
#4126
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Wanted to add what I found helped...
After going through the procedure to set the mirror in the down position, when you shift to park & press M1 to save, continue to hold it for another 3 - 5 seconds until you hear a second beep. I initially didn't hold it long enough for the 2nd beep and the down tilt position was not being saved until I did.
When I press & hold M1, I first get a beep & on-screen IPC messaged about saved; after holding a few more secs I get the second beep but nothing on IPC.
After going through the procedure to set the mirror in the down position, when you shift to park & press M1 to save, continue to hold it for another 3 - 5 seconds until you hear a second beep. I initially didn't hold it long enough for the 2nd beep and the down tilt position was not being saved until I did.
When I press & hold M1, I first get a beep & on-screen IPC messaged about saved; after holding a few more secs I get the second beep but nothing on IPC.
The following users liked this post:
Livnitup (12-13-2016)
#4129
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Can anyone confirm. I have bigger tires on my truck compared to stock.
I have 285/60/20 on now. So going by the calculator I should change.
726-12-01 xxxx 099E xxxx ----stock 275/55/20
xxxx 0A16 xxxx ----current 285/60/20
Thanks guys...
I have 285/60/20 on now. So going by the calculator I should change.
726-12-01 xxxx 099E xxxx ----stock 275/55/20
xxxx 0A16 xxxx ----current 285/60/20
Thanks guys...
#4130
Senior Member
![](https://www.f150forum.com/images/badge/supporter.png)