Originally Posted by jtudor

Ok, I appreciate everyone's help trying to work through these problems.
I have a Canadian F-150 and I've attached screenshots. For whatever reason I still cannot get the HSWM to show but I know they were there before.

Originally Posted by Ifallsguy

Is it possible to get gallons of fuel remaining in the 16? The ideal would be gallons to empty about the fuel gauge and miles to empty in the trip area.

Originally Posted by Livnitup

Connect with FORScan and clear those DTCs before attempting any writes. Also, in settings, connection tab - change "connection type" to bluetooth if it's set on Auto. Then attempt the changes you want to write.

Originally Posted by Wudwork

No luck. Still cannot write after clearing all DTC, setting connection to Bluetooth. I even found a "shared bus" setting that I tried, still no luck. I am getting a DTC? for the OBD device. Mine is v1.4 from July 2012. Could that be too old for this newer program ? Also, I am using the latest BETA of Forscan.

Originally Posted by Livnitup

Sorry for the confusion there because there's multiple values that achieve the same thing. Try this for heated seat icons without Heated Steering Wheel icon:

7D0-01-01 xxxx xxxx 27xx

Originally Posted by hunter306

So i gave this a go, but no luck seeing the icons- still just the date in that quadrant.

I modified that value: xxxx xxxx 27xx
And it didn't show, so I also gave: xxxx xxx3 23xx

And gave another master reboot and that didn't do it either.


Wondering if it's because I only have the 302a package, heated seats, manual single zone climate and no cooled seat backs or heated wheel.

Originally Posted by Livnitup

Curious, do you have this set also along with the change above I said to try?
Climate Quadrant enabled (only Sync 2) APIM 7D0-04-01 0100 0000 00DD

Maybe some members here with Sync 2 can test some values for you but you should be able to get it working.

Originally Posted by Wudwork

- got extended license
- got the suggested bluetooth OBD adapter
- got latest version of forscan on windows 10 laptop. Used all default settings.
- no problems laptop talking to truck
- I made changes to get power fold mirrors to tilt down; no errors.
- EVERY other change resulted in same error "Service procedure has been interupted". I cannot locate any verbose logging or how to toggle on.
- When I started program, I observed some DTC's in APIM, PAM, FCIM, OCS, PDM, DDM

Any ideas why I cannot get changes to write succesfully ?

My truck is in my sig. Loaded up 16 Platinum.

Originally Posted by Firerunner

I was about to say the same thing.... You MUST enable climate Quadrant for the heated seats to show up. I have a 302a also and they work as long as the climate quadrant is there.

Originally Posted by Livnitup

The date of the adapter should be fine. I'd try this with a different laptop if you can just to rule that out or remove and re-pair your adapter with your current laptop. If you still can't write without errors, I'd email the FORScan developers who will probably have you send them FORScan log files and they may be able to pinpoint it for you.