FORScan - software to enable/disable features in your truck
#7022
Member
I am here in Nova Scotia also, I will check mine tomorrow and see if it defaults to MPH.
#7023
FORScan, Powerpoint, Global Windows Questions
Default FORScan, Powerpoint, Global Windows Questions
Hi,
I've been following this thread for about 3 months, and am still plowing my way through the 600+ posts. I have yet to find an answer for the following questions. Anyone feel like helping?
1) I've been seeing all sorts of hardware modules mentioned in the forums, When I do a scan with FORScan and my OBDLink MX, all I ever get to see are the following: APIM, PAM, BdyCM. Is it normal/common that an XLT only has these 3 modules available, or is something not working right with my scantool? See my sig below for my vehicle info.
2) I've attempted to configure the Global Windows mod, but I couldn't get it to do anything. The language used to describe operating the feature ("After pressing lock/unlock on fob, press lock/unlock again and hold button for front windows to go up/down...") is a bit vague. I interpret this as the lock and unlock button are one and the same. Did Ford make remotes with a single Lock/Unlock button? I have a 4-button remote (Lock, Unlock, Start, and Panic). Following the instructions above does not work using this remote. Any pointers/clarification here?
3) Powerpoint timeout. I have (2) USB ports, (3) 12VDC sockets, and (1) 120VAC inverter socket. Are all 6 of these items controlled simultaneously via the powerpoint timeout settings or does it control just the (3) 12VDC sockets as a group? Does the powerpoint timeout disable setting allow for 24/7 12VDC until the battery monitor kills it? If the USB ports are not included, is there any way to have them stay on?
I will greatly appreciate any relevant info.
__________________
Mostly stock 2016 Bluejeans F-150 XLT SCREW 5.0, 6.5' bed...
Additions: BAK Revolver X, Husky Mats and Rear Wheel Well Liners, Rigid Industries SR-Q
Diffused Back Up White LED Lights, Under-rail LED bed lighting
packrat1969 is online now Report Post
Hi,
I've been following this thread for about 3 months, and am still plowing my way through the 600+ posts. I have yet to find an answer for the following questions. Anyone feel like helping?
1) I've been seeing all sorts of hardware modules mentioned in the forums, When I do a scan with FORScan and my OBDLink MX, all I ever get to see are the following: APIM, PAM, BdyCM. Is it normal/common that an XLT only has these 3 modules available, or is something not working right with my scantool? See my sig below for my vehicle info.
2) I've attempted to configure the Global Windows mod, but I couldn't get it to do anything. The language used to describe operating the feature ("After pressing lock/unlock on fob, press lock/unlock again and hold button for front windows to go up/down...") is a bit vague. I interpret this as the lock and unlock button are one and the same. Did Ford make remotes with a single Lock/Unlock button? I have a 4-button remote (Lock, Unlock, Start, and Panic). Following the instructions above does not work using this remote. Any pointers/clarification here?
3) Powerpoint timeout. I have (2) USB ports, (3) 12VDC sockets, and (1) 120VAC inverter socket. Are all 6 of these items controlled simultaneously via the powerpoint timeout settings or does it control just the (3) 12VDC sockets as a group? Does the powerpoint timeout disable setting allow for 24/7 12VDC until the battery monitor kills it? If the USB ports are not included, is there any way to have them stay on?
I will greatly appreciate any relevant info.
__________________
Mostly stock 2016 Bluejeans F-150 XLT SCREW 5.0, 6.5' bed...
Additions: BAK Revolver X, Husky Mats and Rear Wheel Well Liners, Rigid Industries SR-Q
Diffused Back Up White LED Lights, Under-rail LED bed lighting
packrat1969 is online now Report Post
#7024
Senior Member
iTrader: (1)
Its been mph since i bought it and it doesnt change with the miles/km choice in settings. As mentioned, i dont use it so ive never put too much effort into finding a way to change it.
I just popped out in my pj's to look again and as i was sitting there i finally noticed a little message in the lower corner of the digital speedo display itself: "hold ok for kph"
D'oh!
#7025
I've been seeing all sorts of hardware modules mentioned in the forums, When I do a scan with FORScan and my OBDLink MX, all I ever get to see are the following: APIM, PAM, BdyCM. Is it normal/common that an XLT only has these 3 modules available, or is something not working right with my scantool? See my sig below for my vehicle info
My XLT 302A Pkg. has 16 modules
#7026
Quick question - so I got in and made my changes with my surface 4 pro - all good, mirrors, temp display, seats double honk. So I am basically done unless someone can recommend some more useful mods.
My question is this is there a way to hook up my OBD to my phone to monitor the regular vehicle parameters? I purchased the Bluetooth OBD Link - but I cannot get it to pair with my phone - using wither the OBD Link iPhone software or the Forscan Lite.
Any help.
My question is this is there a way to hook up my OBD to my phone to monitor the regular vehicle parameters? I purchased the Bluetooth OBD Link - but I cannot get it to pair with my phone - using wither the OBD Link iPhone software or the Forscan Lite.
Any help.
#7029
Veepeak WiFi OBD2 Scanner for iPhone iPad, Mini OBDII Diagnostic Adapter, Car OBD2 Code Reader Scan Tool for Check Engine Light (MIL) Trouble Code & Live Sensor Data, Support iOS & Android
#7030
The FORScan Guy
Thread Starter
Default FORScan, Powerpoint, Global Windows Questions
Hi,
I've been following this thread for about 3 months, and am still plowing my way through the 600+ posts. I have yet to find an answer for the following questions. Anyone feel like helping?
1) I've been seeing all sorts of hardware modules mentioned in the forums, When I do a scan with FORScan and my OBDLink MX, all I ever get to see are the following: APIM, PAM, BdyCM. Is it normal/common that an XLT only has these 3 modules available, or is something not working right with my scantool? See my sig below for my vehicle info.
2) I've attempted to configure the Global Windows mod, but I couldn't get it to do anything. The language used to describe operating the feature ("After pressing lock/unlock on fob, press lock/unlock again and hold button for front windows to go up/down...") is a bit vague. I interpret this as the lock and unlock button are one and the same. Did Ford make remotes with a single Lock/Unlock button? I have a 4-button remote (Lock, Unlock, Start, and Panic). Following the instructions above does not work using this remote. Any pointers/clarification here?
3) Powerpoint timeout. I have (2) USB ports, (3) 12VDC sockets, and (1) 120VAC inverter socket. Are all 6 of these items controlled simultaneously via the powerpoint timeout settings or does it control just the (3) 12VDC sockets as a group? Does the powerpoint timeout disable setting allow for 24/7 12VDC until the battery monitor kills it? If the USB ports are not included, is there any way to have them stay on?
I will greatly appreciate any relevant info.
__________________
Mostly stock 2016 Bluejeans F-150 XLT SCREW 5.0, 6.5' bed...
Additions: BAK Revolver X, Husky Mats and Rear Wheel Well Liners, Rigid Industries SR-Q
Diffused Back Up White LED Lights, Under-rail LED bed lighting
packrat1969 is online now Report Post
Hi,
I've been following this thread for about 3 months, and am still plowing my way through the 600+ posts. I have yet to find an answer for the following questions. Anyone feel like helping?
1) I've been seeing all sorts of hardware modules mentioned in the forums, When I do a scan with FORScan and my OBDLink MX, all I ever get to see are the following: APIM, PAM, BdyCM. Is it normal/common that an XLT only has these 3 modules available, or is something not working right with my scantool? See my sig below for my vehicle info.
2) I've attempted to configure the Global Windows mod, but I couldn't get it to do anything. The language used to describe operating the feature ("After pressing lock/unlock on fob, press lock/unlock again and hold button for front windows to go up/down...") is a bit vague. I interpret this as the lock and unlock button are one and the same. Did Ford make remotes with a single Lock/Unlock button? I have a 4-button remote (Lock, Unlock, Start, and Panic). Following the instructions above does not work using this remote. Any pointers/clarification here?
3) Powerpoint timeout. I have (2) USB ports, (3) 12VDC sockets, and (1) 120VAC inverter socket. Are all 6 of these items controlled simultaneously via the powerpoint timeout settings or does it control just the (3) 12VDC sockets as a group? Does the powerpoint timeout disable setting allow for 24/7 12VDC until the battery monitor kills it? If the USB ports are not included, is there any way to have them stay on?
I will greatly appreciate any relevant info.
__________________
Mostly stock 2016 Bluejeans F-150 XLT SCREW 5.0, 6.5' bed...
Additions: BAK Revolver X, Husky Mats and Rear Wheel Well Liners, Rigid Industries SR-Q
Diffused Back Up White LED Lights, Under-rail LED bed lighting
packrat1969 is online now Report Post
2. You're not seeing the DDM & PDM modules currently until you resolve #1 above so you have no way to enable global windows until you can program DDM & PDM. All of the changes below are necessary to get global window working:
BCM 726-17-01 0101 0101 014A
BCM 726-17-02 0101 0101 014B
BCM 726-30-01 0101 xxxx xxxx
DDM 740-05-01 Dxxx xx
PDM 741-05-01 Dxxx xx
3. Powerpoint timeouts are the 12V DC receptacles only.
Last edited by Livnitup; 03-06-2017 at 08:33 PM.