FORScan - software to enable/disable features in your truck
06-01-2017, 10:03 PM
#8821
It's my first day
Just a note on secure idle that someone brought to my attention. When you step outside with the key, while engine is running, idle steps up from 500 to 800 RPM. I tested this on my own truck and it's true. Not a big deal, just want to let you know. I've had secure idle enabled for a while now and just never noticed until someone pointed it out.
06-01-2017, 10:08 PM
#8822
Just a note on secure idle that someone brought to my attention. When you step outside with the key, while engine is running, idle steps up from 500 to 800 RPM. I tested this on my own truck and it's true. Not a big deal, just want to let you know. I've had secure idle enabled for a while now and just never noticed until someone pointed it out.
06-01-2017, 10:11 PM
#8823
Senior Member
Originally Posted by Livnitup
Did you try the settings in ACM tab on her Escape for 727-01-01 xxxx xxxx *xxx?
https://docs.google.com/spreadsheets...#gid=338817466
https://docs.google.com/spreadsheets...#gid=338817466
06-01-2017, 10:31 PM
#8824
Senior Member
Someone here asked for a link for more info...
https://www.f150forum.com/f119/homem...9/#post5339471
https://www.f150forum.com/f119/homem...9/#post5339471
Hey guys, I made this Raptor style 3rd brake light with some Feniex Cannon hideaways.. if you notice as I open and close my door.. the gradual fade in & out of the cargo lamps... causes a brief flash.
(The pulsing of the center light was done intentionally)
https://m.youtube.com/watch?v=n-3GteNztms
While this doesn't bother me too much, I was wondering if there is a method to disable the "opera" fade in/out of the courtesy lighting...
I see in the spreadsheet in the BCM tab... lines 166 & 167 refer to the courtesy lighting... is this the same module I need to modify? And is there a chart for the Hex conversion
Thanks!
(The pulsing of the center light was done intentionally)
https://m.youtube.com/watch?v=n-3GteNztms
While this doesn't bother me too much, I was wondering if there is a method to disable the "opera" fade in/out of the courtesy lighting...
I see in the spreadsheet in the BCM tab... lines 166 & 167 refer to the courtesy lighting... is this the same module I need to modify? And is there a chart for the Hex conversion
Thanks!
06-01-2017, 10:54 PM
#8825
The FORScan Guy
Thread Starter
06-01-2017, 11:05 PM
#8826
Senior Member
2016 XLT Sync 3 and CarPlay No Nav.
So I tried to enable USB 2 port 7D0-01-02
x*xx xxxx xxxx
USB2: A=enabled (HMI will be enabled), 2=not enabled (HMI will be not be enabled)
today and I ended up enabling NAV 7D0-01-02
x4xx xxxx xxxx
NAV: 4=enabled (Sync 2), 2=enabled (Sync 3), 0=disabled (Sync 3)
What did I do wrong? How can both USB2 and NAV use the same place to enter a value?
So I tried to enable USB 2 port 7D0-01-02
x*xx xxxx xxxx
USB2: A=enabled (HMI will be enabled), 2=not enabled (HMI will be not be enabled)
today and I ended up enabling NAV 7D0-01-02
x4xx xxxx xxxx
NAV: 4=enabled (Sync 2), 2=enabled (Sync 3), 0=disabled (Sync 3)
What did I do wrong? How can both USB2 and NAV use the same place to enter a value?
06-01-2017, 11:13 PM
#8827
Senior Member
Originally Posted by Livnitup
Try this in ACM to disable turn signal chime on her Escape
727-01-01 xxxx xxxx 8xxx
727-01-01 xxxx xxxx 8xxx
06-01-2017, 11:26 PM
#8828
The FORScan Guy
Thread Starter
2016 XLT Sync 3 and CarPlay No Nav.
So I tried to enable USB 2 port 7D0-01-02
x*xx xxxx xxxx
USB2: A=enabled (HMI will be enabled), 2=not enabled (HMI will be not be enabled)
today and I ended up enabling NAV 7D0-01-02
x4xx xxxx xxxx
NAV: 4=enabled (Sync 2), 2=enabled (Sync 3), 0=disabled (Sync 3)
What did I do wrong? How can both USB2 and NAV use the same place to enter a value?
So I tried to enable USB 2 port 7D0-01-02
x*xx xxxx xxxx
USB2: A=enabled (HMI will be enabled), 2=not enabled (HMI will be not be enabled)
today and I ended up enabling NAV 7D0-01-02
x4xx xxxx xxxx
NAV: 4=enabled (Sync 2), 2=enabled (Sync 3), 0=disabled (Sync 3)
What did I do wrong? How can both USB2 and NAV use the same place to enter a value?
Every position in an address can control up to 4 different things with 2 options each like enabled/disabled.
The following users liked this post:
2016 FX4x4 (06-02-2017)
06-02-2017, 12:02 AM
#8829
Senior Member
I thought I could get by without this (wpt-1239 pigtail) I guess I need it also thought it was just used to make the ports light up.
06-02-2017, 01:40 AM
#8830
It's my first day
Originally Posted by i8iridium
It doesn't, but I found the input on the BCM where the wire would go. Does anyone have a 2016 where the Tailgate Ajar actually still works? I would love to get your BCM data...lol
You ever make any progress on this?
I think Livnitup should edit his spreadsheet to warn people away from touching 726-22-02 if there really is another thread that exists on the internet telling people to change those values for Tailgate Ajar. I had some guy text me about it and I told him exactly that; leave it alone.