FORScan - software to enable/disable features in your truck
06-18-2017, 06:02 PM
#9111
The FORScan Guy
Thread Starter
I'm gonna start mapping out the remaining addresses/values in BCM in the coming days (probably weeks) and adding to the spreadsheet as I do it. There's nothing exciting left that I've seen but feel like it needs to be done for the sake of having the spreadsheet complete.
Last edited by Livnitup; 06-18-2017 at 06:15 PM.
The following 7 users liked this post by Livnitup:
Airborne_Ape (06-18-2017),
carrierj (06-19-2017),
dos0711 (06-19-2017),
Firerunner (06-18-2017),
flsdiver (06-19-2017),
and 2 others liked this post.
06-18-2017, 07:25 PM
#9112
Restarting the truck isn't going to do much. Either disconnect the battery for 10 minutes or reset the ACM & IPC.
I think it's pointless for ForScan users to spend money on ISO-SOT-984 considering you can use this, program it, and also avoid splicing and dicing:
https://youtu.be/x3E43wSPJkI
I think it's pointless for ForScan users to spend money on ISO-SOT-984 considering you can use this, program it, and also avoid splicing and dicing:
https://youtu.be/x3E43wSPJkI
need to get signal at ACM to make this work imo
ill reset as advised and let y'all know
06-18-2017, 07:54 PM
#9113
On down the highway
iTrader: (4)
Join Date: Aug 2014
Location: Not far enough away from Chicago
Posts: 25,044
Received 1,708 Likes
on
1,102 Posts
The following 2 users liked this post by Truckin:
1911Bandit (06-21-2017),
Troyr (06-18-2017)
06-18-2017, 07:57 PM
#9114
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
The following users liked this post:
Troyr (06-18-2017)
06-18-2017, 07:59 PM
#9115
The FORScan Guy
Thread Starter
So one of things I mapped today on Exterior Lighting was the following (my as-built in bold). Anyone want to venture some guesses on what it is?
726-26-01 xxxx xxx* xxxx Ctrl Stop Position Cfg: 0=Duty_Duty, 1=Duty_VRMS, 2=VRMS_Duty, 3=VRMS_VRMS
726-26-01 xxxx xxx* xxxx Ctrl Stop Position Cfg: 0=Duty_Duty, 1=Duty_VRMS, 2=VRMS_Duty, 3=VRMS_VRMS
Last edited by Livnitup; 06-18-2017 at 08:02 PM.
06-18-2017, 08:27 PM
#9116
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
I'm going to take a complete stab in the dark....does it make 3rd brake lights strobe/flash?
06-18-2017, 08:55 PM
#9117
It's my first day
deleted
Last edited by Airborne_Ape; 06-18-2017 at 09:01 PM.
06-18-2017, 09:16 PM
#9118
It's my first day
I ran into this before a few times. Make sure you set 720-01-01 X--- ---- ---- correctly. Configuring the wrong amp will mess up how the audio **** and buttons function. Change it and do a module reset of your APIM and steering wheel controls. If that fails I'll consult the spreadsheet.
Last edited by Airborne_Ape; 06-18-2017 at 09:35 PM.
The following users liked this post:
2k12 FX2 (06-25-2017)
06-18-2017, 09:33 PM
#9119
It's my first day
06-19-2017, 01:45 AM
#9120
It's my first day
726-26 Cornering Present Cfg: 0=disabled, 1=enabled.
Anyone try this yet? I'm wondering if it's like a Cadillac where the mirrors light up to illuminate around a corner with a turn signal OR if it's like Chrysler where the DRL or Headlamp turns off on one side so that oncoming traffic can see your turn signal?
I'll add it to my 'things to try' list. I'm just wondering if anyone here has messed with it already?
Anyone try this yet? I'm wondering if it's like a Cadillac where the mirrors light up to illuminate around a corner with a turn signal OR if it's like Chrysler where the DRL or Headlamp turns off on one side so that oncoming traffic can see your turn signal?
I'll add it to my 'things to try' list. I'm just wondering if anyone here has messed with it already?