FORScan - software to enable/disable features in your truck
07-07-2017, 06:05 PM
#9411
didn't see any changes, other suggestions?
Also has the bulb outage detection for the chmsl been figured out? I have a recurring dtc since swapping to the raptor led version on my xlt
would it be 726-24-01 xxxx xxxx x1xx
Also has the bulb outage detection for the chmsl been figured out? I have a recurring dtc since swapping to the raptor led version on my xlt
would it be 726-24-01 xxxx xxxx x1xx
07-07-2017, 07:20 PM
#9412
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
Right off of the top of my head I would say the entire main harness would have to be changed.
07-07-2017, 07:49 PM
#9413
Hey Livinitup! Thank you for so awesomely maintaining your spreadsheet. I have gotten so much benefit from it.
I have only one lil request for it, and it's mostly an asthetics type thing. Some of us live in acronym hell on a day to day basis, so can't remember what the module acronyms all stand for. Might it be possible at the top of each tabbed page to title out what the full name of the module acronym stands for.. ie BCM, Body Control Module.
Just a friendly request, no need to oblige if you see no benefit.
Thanks again!
I have only one lil request for it, and it's mostly an asthetics type thing. Some of us live in acronym hell on a day to day basis, so can't remember what the module acronyms all stand for. Might it be possible at the top of each tabbed page to title out what the full name of the module acronym stands for.. ie BCM, Body Control Module.
Just a friendly request, no need to oblige if you see no benefit.
Thanks again!
07-07-2017, 08:04 PM
#9414
Senior Member
Hey Livinitup! Thank you for so awesomely maintaining your spreadsheet. I have gotten so much benefit from it.
I have only one lil request for it, and it's mostly an asthetics type thing. Some of us live in acronym hell on a day to day basis, so can't remember what the module acronyms all stand for. Might it be possible at the top of each tabbed page to title out what the full name of the module acronym stands for.. ie BCM, Body Control Module.
Just a friendly request, no need to oblige if you see no benefit.
Thanks again!
I have only one lil request for it, and it's mostly an asthetics type thing. Some of us live in acronym hell on a day to day basis, so can't remember what the module acronyms all stand for. Might it be possible at the top of each tabbed page to title out what the full name of the module acronym stands for.. ie BCM, Body Control Module.
Just a friendly request, no need to oblige if you see no benefit.
Thanks again!
07-07-2017, 08:12 PM
#9416
Senior Member
That list has two different categories. The first is listed as Powertrain Control Modules. The second longer list is the modules programmed with FORScan. It is Shown as BCMii & BdyCM, but simply BCM for practical purposes here.
Last edited by carrierj; 07-07-2017 at 08:16 PM.
07-07-2017, 08:41 PM
#9417
Senior Member
In the latest spreadsheet, I see that there is now an entry for tire circumference in the APIM. I never noticed it before.
7D0-07-03 xxxx **xx xxxx
Is this only for Sync 3? My APIM stops at 7D0-04-02
Is this for the Sync 3 navigation maybe?
I was hoping that having a matching value here with the tire circumference change in BCM might clear the PCM DTC.
7D0-07-03 xxxx **xx xxxx
Is this only for Sync 3? My APIM stops at 7D0-04-02
Is this for the Sync 3 navigation maybe?
I was hoping that having a matching value here with the tire circumference change in BCM might clear the PCM DTC.
07-07-2017, 11:32 PM
#9418
The FORScan Guy
Thread Starter
In the latest spreadsheet, I see that there is now an entry for tire circumference in the APIM. I never noticed it before.
7D0-07-03 xxxx **xx xxxx
Is this only for Sync 3? My APIM stops at 7D0-04-02
Is this for the Sync 3 navigation maybe?
I was hoping that having a matching value here with the tire circumference change in BCM might clear the PCM DTC.
7D0-07-03 xxxx **xx xxxx
Is this only for Sync 3? My APIM stops at 7D0-04-02
Is this for the Sync 3 navigation maybe?
I was hoping that having a matching value here with the tire circumference change in BCM might clear the PCM DTC.
I'm sure changing circumference there would have no effect on the PCM DTC though.
The following users liked this post:
carrierj (07-07-2017)
07-08-2017, 12:18 AM
#9419
Senior Member
Hey Liv, curious. You interested in adding a tab for people that can find some users in there area that can do forscan changes?
I know before I got in to it a member here helped me out and I'd like to return the favor.
Wouldn't be a bad idea to keep a tab with user names and areas they are in that are willing to help people in their area.
I for one and more than happy to help anyone in the DFW area.
I know before I got in to it a member here helped me out and I'd like to return the favor.
Wouldn't be a bad idea to keep a tab with user names and areas they are in that are willing to help people in their area.
I for one and more than happy to help anyone in the DFW area.
07-08-2017, 12:36 AM
#9420
The FORScan Guy
Thread Starter
Hey Liv, curious. You interested in adding a tab for people that can find some users in there area that can do forscan changes?
I know before I got in to it a member here helped me out and I'd like to return the favor.
Wouldn't be a bad idea to keep a tab with user names and areas they are in that are willing to help people in their area.
I for one and more than happy to help anyone in the DFW area.
I know before I got in to it a member here helped me out and I'd like to return the favor.
Wouldn't be a bad idea to keep a tab with user names and areas they are in that are willing to help people in their area.
I for one and more than happy to help anyone in the DFW area.