Aashu

Does anyone has directions or pictures of removing front liners to the point that I could easily reach headlights ?

Will be installing morimoto and I read that the adjust screws are accessible from inside of fender

barneyz71

It is way to simple to need instructions. a few screws and few push pins. Should take five minutes to remove. I removed mine to change the washer pump.

SPOAT

Kevin711

I just loosened mine to do a bulb change. Very easy except for the push pin at the top because it goes through metal panels but everything else was not that bad.

BadaBing1

iTrader: (1)

Does the wheel lip molding get in the way?

Whysoangry

From memory:

Remove the 4 screws along the lip, and I used a soft pry tool to pull the 2 (different) body rivets. One is a plug that needs to come out slowly, and a standard body rivet. My wheel well liner is a soft plastic, easily moved aside and out of the metal lip and tabs of the fender. I had easy access to lows, highs, and fogs. Good luck!

Gozuki

iTrader: (6)

I must not have pulled the liner far enough out, I had blind fumbling one handed access that was less than great.