When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good news, bad news. Bad news first, I didn't get a full refund (I got back $175 of the $279, so...) -- Good news next, I kept the letters and was actually able to repair the grille with some JB Weld and patience.
Figured since I put JB Weld on it, I should sand it and repaint it. I went for a subtle two tone, black and magnetic grey. This is the first pass with trim and bumper paint.
Close up of the repaired section. There's a tiny bit of JB weld I didn't want to sand down to bare plastic, so I smoothed it out as best I could.
Second and third pass with spray in bed liner. Removed the paper and tape and voila, two-tone.
Been watching this thread for sometime and finally came across a used grill on Kijiji. After a friend of mine picked it up for me I found it felt fragile. It looks like the GalaxyMoto but I couldn't see any labels indicating so. Regardless I felt it was time to LineX the box. So I had the grill done to. I've seen a few posters do this and really liked the look. Only thing to consider is the Blue emblem. I decided to toss on the stock one. but I think I'm going to spring for a Magnetic colour set for the front and rear when a have some free funds. I think I also may change the 3 white lights to orange.
Have been in contact with LED of Texas on making a switchback style led to fit the grill. Yellow while driving (for legal reason, white when parked). Just waiting...
Have been in contact with LED of Texas on making a switchback style led to fit the grill. Yellow while driving (for legal reason, white when parked). Just waiting...
02-21-2018, 03:48 PM
