Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by:

Knocking noise from moonroof

Thread Tools
 
Search this Thread
 
Old 03-12-2016, 05:41 PM
  #431  
Junior Member
 
tortolabob's Avatar
 
Join Date: Sep 2015
Location: Eastern Shore Of Virginia
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

I had the TSB done yesterday and after 24hrs on bumpy back roads its still pretty quiet. Same roads on Thursday were almost unbearable so...so far so good.
Old 03-18-2016, 02:56 PM
  #432  
Member
 
mjbenedict's Avatar
 
Join Date: Apr 2015
Posts: 44
Received 23 Likes on 11 Posts
Default

Mine was done about a month ago and all was fine. Seems to be starting up again. The last time it got worse over time so I will see what this ends up doing. They replaced the tracks in mine and took a couple days at shop.
Old 03-18-2016, 06:43 PM
  #433  
Beer Gut Extraordinaire

 
HCFX2013's Avatar
 
Join Date: Aug 2011
Location: Canada
Posts: 17,371
Received 2,103 Likes on 1,318 Posts

Default

Mine is back but not nearly like it was before. Only over bumps that really twist the chassis I hear a little bit of a creak. Not nearly as bad as it was before though.
Old 03-18-2016, 09:25 PM
  #434  
2023 402a Tremor
 
Tolson37's Avatar
 
Join Date: Jun 2013
Posts: 740
Received 134 Likes on 93 Posts

Default

Mine has gotten better since its warming up now. Weird.
Old 03-21-2016, 05:16 PM
  #435  
Member
 
VTHokie's Avatar
 
Join Date: Nov 2015
Location: Manassas, VA
Posts: 38
Received 16 Likes on 15 Posts
Default

Originally Posted by HCFX2013
Mine is back but not nearly like it was before. Only over bumps that really twist the chassis I hear a little bit of a creak. Not nearly as bad as it was before though.
Sorry to hear that. I have put 2,500 miles on mine since the frame assembly was replaced and it's still quiet. As a precaution I purchased the grease recommended in the TSB and I performed the entire TSB myself. Keeping my fingers crossed. Not getting too optimistic until I've put 5,000 miles on the new frame. That's when the original failed. Have you done the TSB?
Old 03-21-2016, 06:31 PM
  #436  
Junior Member
 
Vrroomm06's Avatar
 
Join Date: Dec 2015
Location: Livonia MI
Posts: 18
Likes: 0
Received 4 Likes on 4 Posts
Default

Originally Posted by VTHokie
Sorry to hear that. I have put 2,500 miles on mine since the frame assembly was replaced and it's still quiet. As a precaution I purchased the grease recommended in the TSB and I performed the entire TSB myself. Keeping my fingers crossed. Not getting too optimistic until I've put 5,000 miles on the new frame. That's when the original failed. Have you done the TSB?
What did they replace in your frame and why?
Old 03-21-2016, 08:39 PM
  #437  
Member
 
VTHokie's Avatar
 
Join Date: Nov 2015
Location: Manassas, VA
Posts: 38
Received 16 Likes on 15 Posts
Default

Originally Posted by Vrroomm06
What did they replace in your frame and why?
They basically replace the entire moon roof except the two glass panels and the drive motors and a few other components they transfer over. The part number is FL3Z-16502C22-A. It includes the tracks that the front glass moves on. It's a very large job as it requires removing the headliner. Takes several days. In terms of the "why?"; well we had tried several intermediate steps to no avail. They included aligning glass panels, lubricating tracks, replacing the rear glass panel (which separately required the headliner be removed). All of these steps seemed to help slightly but none totally eliminated the knocking noise. There was no TSB available at the time so we had to seek out a more aggressive solution on our own. Thus far the decision has worked, but as I mentioned in my earlier post, I'll reserve judgement until I have put at least 5,000 miles on the new track/frame assembly as that is when the original moon roof started acting up.
Old 03-23-2016, 11:32 PM
  #438  
Beer Gut Extraordinaire

 
HCFX2013's Avatar
 
Join Date: Aug 2011
Location: Canada
Posts: 17,371
Received 2,103 Likes on 1,318 Posts

Default

Originally Posted by VTHokie
Sorry to hear that. I have put 2,500 miles on mine since the frame assembly was replaced and it's still quiet. As a precaution I purchased the grease recommended in the TSB and I performed the entire TSB myself. Keeping my fingers crossed. Not getting too optimistic until I've put 5,000 miles on the new frame. That's when the original failed. Have you done the TSB?
I found out that it's the front of the sliding panel creaking against the body of the truck. The panel itself is sitting a little high and rubs against the body of the truck, it has lots of play and movement against the body. Probably just needs an adjustment.
Old 03-27-2016, 09:27 PM
  #439  
Beer Gut Extraordinaire

 
HCFX2013's Avatar
 
Join Date: Aug 2011
Location: Canada
Posts: 17,371
Received 2,103 Likes on 1,318 Posts

Default

Adjusted the glass and applied some rubber seal lubricant to the front seal of the glass and it is now bank vault silent again. Woohoo!
Old 03-31-2016, 10:52 PM
  #440  
Member
 
ShawnCBerg's Avatar
 
Join Date: Sep 2015
Posts: 54
Received 6 Likes on 5 Posts
Default

Originally Posted by HCFX2013
Adjusted the glass and applied some rubber seal lubricant to the front seal of the glass and it is now bank vault silent again. Woohoo!
How do you adjust the glass? What lubricant did you use?


Quick Reply: Knocking noise from moonroof



All times are GMT -4. The time now is 01:55 PM.