Sync Connect Retrofit (in any Ford).
04-01-2020, 02:17 PM
#2281
Senior Member
After using this a few times I am noticing that I get a confirmation that my doors lock and unlock, but I have never gotten one for the remote start yet. Is this common? The truck has been started every time, but the app does not receive signal of it happening.
Also anyone know if i can disable this prompt Ford Pass Connect is receiving data and location info for remote features? I know when I set this up I changed the APIM line to say that it has a Hotspot, but this particular TCU only has the Purple connector for the internal antenna did this need to be changed? I believe it was a 3xxx before.
Instruct the APIM that the TCU is hotspot capable:
7D0-02-03: 4xxx
Also anyone know if i can disable this prompt Ford Pass Connect is receiving data and location info for remote features? I know when I set this up I changed the APIM line to say that it has a Hotspot, but this particular TCU only has the Purple connector for the internal antenna did this need to be changed? I believe it was a 3xxx before.
Instruct the APIM that the TCU is hotspot capable:
7D0-02-03: 4xxx
04-01-2020, 07:27 PM
#2284
So sent some info to Jamie (thank you btw) he mentioned that the reason I might not be getting the confirmations on startup might be because I have the 3 button remote. I have the remote start module installed also. Anyone else with the 3 button remote who did this modification get a confirmation that the vehicle has started? Mine starts, but I get the timeout message that the vehicle did not start.
04-01-2020, 07:45 PM
#2285
Senior Member
So sent some info to Jamie (thank you btw) he mentioned that the reason I might not be getting the confirmations on startup might be because I have the 3 button remote. I have the remote start module installed also. Anyone else with the 3 button remote who did this modification get a confirmation that the vehicle has started? Mine starts, but I get the timeout message that the vehicle did not start.
04-01-2020, 08:05 PM
#2286
So sent some info to Jamie (thank you btw) he mentioned that the reason I might not be getting the confirmations on startup might be because I have the 3 button remote. I have the remote start module installed also. Anyone else with the 3 button remote who did this modification get a confirmation that the vehicle has started? Mine starts, but I get the timeout message that the vehicle did not start.
04-01-2020, 08:08 PM
#2287
Senior Member
04-01-2020, 08:19 PM
#2288
So sent some info to Jamie (thank you btw) he mentioned that the reason I might not be getting the confirmations on startup might be because I have the 3 button remote. I have the remote start module installed also. Anyone else with the 3 button remote who did this modification get a confirmation that the vehicle has started? Mine starts, but I get the timeout message that the vehicle did not start.
but my remote is 4 button , , ,
Do the 3 button remotes get their own confirmation back from the truck ?
my 4 button does, a little led blinks green, or red.
If the 3 button remotes don't catch confirmation then I thinking the tcu can't find it from the rest of the remote start modules
Last edited by neilc1; 04-01-2020 at 08:24 PM.
04-01-2020, 08:27 PM
#2290
So I have confirmation of start, stop, lock, unlock,
but my remote is 4 button , , ,
Do the 3 button remotes get their own confirmation back from the truck ?
my 4 button does, a little led blinks green, or red.
If the 3 button remotes don't catch confirmation then I thinking thr tcu can't find it from the rest of the remote start modules
but my remote is 4 button , , ,
Do the 3 button remotes get their own confirmation back from the truck ?
my 4 button does, a little led blinks green, or red.
If the 3 button remotes don't catch confirmation then I thinking thr tcu can't find it from the rest of the remote start modules