Sync Connect Retrofit (in any Ford).
#2701
#2702
It's my first day
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by McViper
unless you have a TCU with HS4-CAN and european eCall compability (three FAKRA connectors) Which bus is used does not decide the TCU, but the firmware you flashed. I can flash my German HS4 TCU with US Firmware and after that it works on HS3.
My understanding is that Ford owners from across the internet are now reading this thread. Ranger owners in Australia, Focus owners in Russia, Kuga owners in the UK, are linking this in other forums. This subject is quickly growing outside of my knowledge base. I feel limited to helping Ford owners in North America. But if someone else somewhere in the world finds this thread helpful than so be it.
#2703
It's my first day
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by l smith
Hi guys I have been reading through this thread and I have question my truck is a 2016 F150 I checked Behind the rear seats there is no sync connect. Module no harness I download the FordPass app and open it and this is what I see has anyone ever come across this is there another location for the module any input will be appreciated Attachment 558597 I can see fuel level odometer and oil life I want to give this mod a try
- The Ford Pass App is pulling data off the APIM when app link is in use.
- The Ford pass app received stats based on your last dealer visit.
- Your truck might have a ford fleet telematics unit installed.
Whatever the case is, because you drive a 2016 F150, there is no cheaters path forward. If you want Sync Connect your only option will be to follow through the thread and do what everyone else has.
#2704
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Im trying to depin the 4 wires from the gateway connector but I am having trouble getting them to depin. I’ve unplugged the gateway module so it is hanging now, and I removed the clearish cover/tab that’s on the mating side. But still can’t seem to figure out how to remove the 4 wires to depin properly. Can anyone chime in and assist? This is the last part to connect my sync harness and test port so I can finally start the forscan process. I travel for work so I’m heading to Nevada tomorrow, and trying to at least finish the wiring portion of this mod this evening while it’s all disassembled and before I leave to Nevada for work for a few weeks. Any advice would be greatly appreciated everyone!
#2705
Senior Member
iTrader: (1)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Im trying to depin the 4 wires from the gateway connector but I am having trouble getting them to depin. I’ve unplugged the gateway module so it is hanging now, and I removed the clearish cover/tab that’s on the mating side. But still can’t seem to figure out how to remove the 4 wires to depin properly. Can anyone chime in and assist? This is the last part to connect my sync harness and test port so I can finally start the forscan process. I travel for work so I’m heading to Nevada tomorrow, and trying to at least finish the wiring portion of this mod this evening while it’s all disassembled and before I leave to Nevada for work for a few weeks. Any advice would be greatly appreciated everyone!
![Smile](https://www.f150forum.com/images/smilies/smile.gif)
#2706
Senior Member
The following users liked this post:
2016BoostedGreyGoose (05-31-2020)
#2707
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Im trying to depin the 4 wires from the gateway connector but I am having trouble getting them to depin. I’ve unplugged the gateway module so it is hanging now, and I removed the clearish cover/tab that’s on the mating side. But still can’t seem to figure out how to remove the 4 wires to depin properly. Can anyone chime in and assist? This is the last part to connect my sync harness and test port so I can finally start the forscan process. I travel for work so I’m heading to Nevada tomorrow, and trying to at least finish the wiring portion of this mod this evening while it’s all disassembled and before I leave to Nevada for work for a few weeks. Any advice would be greatly appreciated everyone!
I know it’s easy if the connector looks like mine 😅
![](https://cimg1.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/c144170d_a44d_4a0f_a97b_b15b76f8f8cd_3dabd97a8826f78f36dc85321733a44c1d08a4c7.jpeg)
![](https://cimg3.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/a650e824_3254_4e15_88c9_6184fec6efca_4c17402001c3c701b1139972984d3624ca65cf77.jpeg)
#2709
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Since this will be my first foray into even using Foracan this is intimidating to me. So let me ask. I have a ‘19 XL. I have the harness. I also have a black puck/box on top of my cab. I think from what I’ve read I still need to buy 2 (?) Bingfu antennas. So if I give my VIN to this fella, Jason at FLVPmods, and get him to send me a pre-programmed TCU then all is need to do is plug it and the antennas in and edit some things in ForScan? Does that sound about right?
#2710
It's my first day
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Originally Posted by alanis928
Im trying to depin the 4 wires from the gateway connector but I am having trouble getting them to depin.