jsmith032

I've reformatted the drive at least 3 different times now and copied the files and it still doesnt seem to like it.

SwatDawg15

Post your *.lst file

jsmith032

Its the one I downloaded.

SwatDawg15

Remove the spaces.
Should be APPS=5U5T etc etc
Go down the whole list.

jsmith032

Still doesnt work. Also, the OP has spaces, not that it mattered.

APPS=5U5T-14G381-CD.tar.gz
VOICE=5U5T-14G391-CB.tar.gz
VOICE_NAV=4U5T-14G422-CAC.tar.gz
VOICE_NAV=4U5T-14G422-CBC.tar.gz
VOICE_NAV=4U5T-14G422-CCC.tar.gz
GRACENOTES=4U5T-14G423-CA.tar.gz
MAP_LICENSE=4U5T-14G424-CB.tar.gz
MAP=4U5T-14G421-CAB.tar.gz
MAP=4U5T-14G421-CBB.tar.gz
MAP=4U5T-14G421-CCB.tar.gz
MAP=4U5T-14G421-CDB.tar.gz
MAP=4U5T-14G421-CEB.tar.gz
MAP=4U5T-14G421-CFB.tar.gz
MAP=4U5T-14G421-CGB.tar.gz
MAP=4U5T-14G421-CHB.tar.gz
MAP=4U5T-14G421-CJB.tar.gz

SwatDawg15

Are you giving it time to start? Sometimes it takes a few min. Did you cycle the key, etc?
If you are, then use a different USB stick. You know the first one works, so reformat it and use it.
I have two different USB sticks that will not work for some strange reason lol

jsmith032

Im re-downloading the USB2 and putting it on a different USB stick.

SwatDawg15

Shouldnt have to re-download. Just move it from one stick to another.

JRSBill

Spaces do not matter

macgeniuspr

I tried to install it on my '19 Lincoln and the system rebooted after about 20-30 minutes and booted into 3.4 and went back to Updating System Software. From there, it rebooted again and booted back into 3.4 and said Updating System Software... sat on the screen for 10 minutes and rebooted again and showed Updating System Software. It did this endlessly until I pulled out the USB upon one of the reboots. Is this normal? Coming from 3.3 19052. 3.4 seemed to run fine after pulling out the USB but I'm wondering why it was doing that. I just used the USB3 files as stated for 2019 vehicles with 3.3.