jamie75

Got CL voice file installed now if I could get AT&T to update their database with my vin for the hotspot 😎

leonmckee

Done

1) Reverted to 19200 - 5U5T-14G381-CD.tar.gz - Took 6 minutes with a USB 3.0 stick.

EDIT: Great solution for combining steps 2 and 3 here: Airborne_Ape All-In-One

2) Performed Reformat - 1U5T-14G386-CB.tar.gz - Took about 1 minute with a USB 3.0 stick.

3) Installed the complete 20021 update - Took 25 minutes with a USB 3.0 stick

APPS = 5U5T-14G381-EB.tar.gz
VOICE = 5U5T-14G391-CL.tar.gz
VOICE_NAV = 4U5T-14G422-CAF.tar.gz
VOICE_NAV = 4U5T-14G422-CBF.tar.gz
VOICE_NAV = 4U5T-14G422-CCF.tar.gz
GRACENOTES = 4U5T-14G423-CA.tar.gz
MAP_LICENSE = 4U5T-14G424-CC.tar.gz
MAP = 4U5T-14G421-CAC.tar.gz
MAP = 4U5T-14G421-CBC.tar.gz
MAP = 4U5T-14G421-CCC.tar.gz
MAP = 4U5T-14G421-CDC.tar.gz
MAP = 4U5T-14G421-CEC.tar.gz
MAP = 4U5T-14G421-CFC.tar.gz
MAP = 4U5T-14G421-CGC.tar.gz
MAP = 4U5T-14G421-CHC.tar.gz
MAP = 4U5T-14G421-CJC.tar.gz





Leon McKee

jd11

i did a reformat and updated my maps to the new NA 1.19 as well as the latest app version of 20021 but with the CK voice file, and now just my luck a few hours later the new CL voice file is available lol

question...
can i update just the voice file? to the latest CL version? if so what should my autoinstall file look like.
Or do i need to have the 20021 app file plus the new CL voice file on the usb as well?

Thanks in advance

Airborne_Ape

Just out of curiosity, did you install Fords updated USB type C hub for Sync 3.4? I know of an MKC owner who had similar issues go away after changing to the newer usb hub.

BroMarduk

You can create a single file USB installer drive with the 5U5T-14G391-CL file in the SyncMyRide directory and an autoinstall.lst that would look similar to (replace the X's with the full file name):

[SYNCGen3.0_ALL]
Item1 = 5U5T-14G391-CL
Open1 = SyncMyRide\5U5T-14G391-CL_XXXXXXXXXXXXX.TAR.GZ
Options = AutoInstall

BarryT82

iTrader: (1)

where is the 1.19 file located?

Airborne_Ape

Right here.

And it's not one file. It's all of these together:

dustinevans85

Can someone just post the direct links to the complete file list thats needed? All these file names are becoming a jumbled mess,im currently on 19274

jd11

Thanks for your help!
I had done single file updates in the past but its been awhile and i was clearly messing up my autoinstall file naming lol
All good now and updated to the latest everything.

Airborne_Ape

I'm going to completely redo my first post at some point in the near future because it's obsolete and the firmware update is clearly not something most people should attempt. Along with this I'm pulling all the files down now (because they're old). I'll upload something else sometime this week. I'm looking at keeping the instructions simple.
Pretty much a simple guide to upgrade or downgrade to 3.4 build 19200, and how to perform a clean install with NA 1.19 maps using only one disk.