Stang69428

Is the USB resume music bug still present? I read earlier that people were having issue with not being able to advance tracks with the steering wheel controls after upgrading to 3.4 20021. Some thought that upgrading to the new USB C hub might correct it but I never saw any verification if it did. Since I listen to my music on a flash drive, InI will hold off on upgrading if it is still an issue.

Ben Kelly

Sync has to do with the screen and APIM, the center screen (cluster) is known as the IPC and is completely different. I think you'd be doing some hardware changes there, and i think somewhere i read they won't fit, could be wrong though.

Sidenote - anybody have Forscan sheet for Sync 3.4 settings in F150? Trying to find the Bronco startup screen, but the spreadsheet i have hasn't been updated since September and doesn't have any info.
Thanks!

JRSBill

Still present. I went back to 19274 and everything is fine again. I won’t order the Chinese hub until I’m back from my DC trip in a few weeks and try again with it installed.

KWS 2.7

Its nice, also check out the avaitor screem.. I am currently using the Ford Performance screen.
7D0-02-01 xxxx **xx xxxx
** = 0F - Navigator
** = 10 - Ford Performance
** = 11 - Aviator
** = 12 - Explorer
** = 13 - Corsair
** = 14 - Nautilus
** = 17 - Bronco

Ben Kelly

Yeah, i played with them on the Explorer the other day but F150 sheet didn't have the info...finally just tried the numbers from there and they worked lol. Thanks. Kinda upset they don't have a nice F150 one....

KWS 2.7

You would think they would at least have the ford tough animation. Though I probably wouldn't use it if they did.

Airborne_Ape

Not really. For some people they magically appear after a little while and for others they don't. I don't know what causes it and I have no solution. Platinumowner confirmed already the logos are included in the files you installed. So I'm going to say it's generic bug that affects some but not all Non-Nav owners for reason nobody is really sure of.

DCM

To see that, you would have to have navigation selected as the display for the cluster, and be on a road that nav knows the speed limit for; mostly state and federal highways. Lots of roads I travel, speed limit doesn't show on either display. EDIT: But I'm still on the 2018 maps.

C17chief

I don’t know for certain as this is something I never focused on, but I think there is more to it than that. On my 16, IPC is updated to latest in IDS, and I’m running sync 3.4, but I did not update firmware for the APIM. Also with the 19 maps, speed limit shows on nearly all roads around me no matter how minor, except in residential neighborhoods. The navigation display in the instrument cluster is still the same as it’s always been since I got the truck. I suspect maybe the APIM firmware has a hand in this.

DCM

I went from 3.0 to 3.4 and noticed no difference in the cluster, only the center display.