jdroller

Do you have the P/N for the Super Duty?

mnickolson

https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Spaniard85

Just an FYI since I did this on my last truck, it's not a direct fit. Both the new light housings and the bumper pad are going to require some "massaging" to get everything to fit. It's not a terrible job by any means, just wanted to be sure proper expectations are set.

jdroller

I wonder if it will fit better on a Raptor that has the same bumper as the Super Duty.

NASSTY

There are 3 different options.
These are the most expensive. They are OEM Super Duty housings that come with LED lights. They weren't quite bright enough for me so I replaced the stock LEDs.
HC3Z-13550-C
HC3Z-13550-D

These are a bit cheaper. They are OEM and come with non-LED lights, but you can use your own LEDs if you have them.
HC3Z-13550-A
HC3Z-13550-B

Or you can find aftermarkets like mnickolson posted. I removed the OEM Super Duty housings from my 2017 before I traded it to keep them for my 2020. I replaced them with some cheap aftermarket LEDs with smoked lenses. I paid around $16 for the aftermarket ones.

Eco3.5Turbo

iTrader: (1)

Wondering if the "massaging" includes any cutting.

NASSTY

The Raptor has the same plastic bumper pad as other F150s.so you have to enlarge the holes in the bumper pad for the Super Duty housings to fit. I did the Super Duty license plate housing mod to my 2017 and 2020 Raptors.

Spaniard85

Hmm that's a good question! Let us know if you try it!

Spaniard85

It does. You'll need to cut back the mounting "tabs" on the light housings and then enlarge the openings in the bumper pad. Just take your time and take off a little at a time.

NASSTY

Cutting or dremeling or however you choose to enlarge the holes. I used a die grinder with an acorn bit. That is like a dremel tool on steroids.