What did you do to your truck today? Reboot.
#2841
Village Sociopath
![](https://www.f150forum.com/images/badge/supporter.png)
![](https://www.f150forum.com/images/ranks/veteran_navy.png)
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,760
Received 10,201 Likes
on
6,591 Posts
![](https://www.f150forum.com/images/ranks/10years-1.png)
#2842
Dielectrically 5w30
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Yeah, took me a while to work out the product instead of the brand name
![Sad](https://www.f150forum.com/images/smilies/sad.gif)
The following users liked this post:
johnday in BFE (04-11-2022)
#2843
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
I asked where it drains awhile back but can't remember the answer...
#2844
Smarter than most Racoons
#2845
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Sorry. Its a dometic console fridge. If you build an f150 or superduty they come up as an accessory you can add to the build. Only fits half a pack of sodas. I am taking this cross country and planning to do long distance trips. Whenever I looked into the console it was filled it just complete junk so I might as well put a fridge. Also have plans on putting a 12v 90l freezer in the bed at some point...
Installs in my build thread. Takes about 10 minutes but you need to cut a 3" hole inside the console. But beware of the instructions. Take the 10 seconds and pop off the console trim and push away the wiring harness behind. Its not supposed to be there, but it can shift. The wire clip that held it in place seemed to have fell off. The harness for the shifter is there (ask me how I know).
Asides from having to repair a few chewed up wires the fridge works great. Right when you power it up the walls of the interior are cold. I haven't done any scientific tests, but I am happy. I've had dometics before and they make pretty good fridges. The compressor is a secop which I am told is same same but different from the danfoss.
Oh I forgot to Add. Aside from the hole being there they give you a block off plate for the hole you cut out. So if you need to use your console you can unplug it from the 12v socket, pop out the fan, and slide it out and have full use of your console bin again. All that will be left in the console will be the block off plate and spacers.
Installs in my build thread. Takes about 10 minutes but you need to cut a 3" hole inside the console. But beware of the instructions. Take the 10 seconds and pop off the console trim and push away the wiring harness behind. Its not supposed to be there, but it can shift. The wire clip that held it in place seemed to have fell off. The harness for the shifter is there (ask me how I know).
Asides from having to repair a few chewed up wires the fridge works great. Right when you power it up the walls of the interior are cold. I haven't done any scientific tests, but I am happy. I've had dometics before and they make pretty good fridges. The compressor is a secop which I am told is same same but different from the danfoss.
Oh I forgot to Add. Aside from the hole being there they give you a block off plate for the hole you cut out. So if you need to use your console you can unplug it from the 12v socket, pop out the fan, and slide it out and have full use of your console bin again. All that will be left in the console will be the block off plate and spacers.
Last edited by elizer; 04-11-2022 at 05:06 PM.
The following 4 users liked this post by elizer:
The following 2 users liked this post by WVMoose:
johnday in BFE (04-11-2022),
[F2C]MaDMaXX (04-11-2022)
The following 10 users liked this post by autoworker:
artsr2002 (04-13-2022),
blkZ28spt (04-13-2022),
foxx4afoxx (04-13-2022),
gwise06 (04-14-2022),
johnday in BFE (04-15-2022),
and 5 others liked this post.
#2848
Super Moderator
![](https://www.f150forum.com/images/badge/supporter.png)
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Bags of oil ?
Tell me that's not an environmental disaster waiting to happen. lol
Tell me that's not an environmental disaster waiting to happen. lol
#2849
Senior Member
#2850
Dielectrically 5w30
The following users liked this post:
blkZ28spt (04-13-2022)