When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Who here has done light tint on their tails (ones with the radar in them, I am swapping so covering the radar is not an issue) but what did you use and pics please
Where you see the little skull heads is the bolts to mount the lights to the bumper, I then used black auto silicone to seal any gaps around the light housing, then I used a prewired harness with switch to connect the lights. I used a dremel tool with a disc to cut the opening. It was really a easy task to complete.
Thank you. What pre made harness are you referring too? One you made?
O'Reilly autoparts has a prewired harness for around $20-29, it has everything you need, just hook the wires from your lights to it and you are connected. It has the switch, diode, fuse and the wire connectors.
The switch will come through the firewall and connect to a quick release then it runs to the battery and a ground spot on the vehicle, then runs to your lights, I put all four led cubes on the one switch since the leds are not pulling alot.
O'Reilly autoparts has a prewired harness for around $20-29, it has everything you need, just hook the wires from your lights to it and you are connected. It has the switch, diode, fuse and the wire connectors.
The switch will come through the firewall and connect to a quick release then it runs to the battery and a ground spot on the vehicle, then runs to your lights, I put all four led cubes on the one switch since the leds are not pulling alot.