What Mods/Changes Have You Done To Your 2015 or 2016???
#2841
Senior Member
#2844
- 2.25" ReadyLift Level
- 3" ReadyLift Rear blocks
- 305/55R20 Nitto Terra Grappler G2 XL Tires
- Foose Switch 20x9 wheels
- Anzo Black Headlights
- Diode Dynamics 8000K HID kit
- Diode Dynamics switchback turn signals
- Diode Dynamics cargo and tag lights
- Morimoto black LED fog lights
- Truxedo Deuce 2 bed cover
- 25% front tint, 55% rear and moonroof tint
- Line-X
- Debadged
- AVS BugFlector
Last edited by MagNitto; 09-03-2016 at 09:52 PM.
#2845
On down the highway
iTrader: (4)
Join Date: Aug 2014
Location: Not far enough away from Chicago
Posts: 25,044
Received 1,708 Likes
on
1,102 Posts
- 2.25" ReadyLift Level
- 3" ReadyLift Rear blocks
- 305/55R20 Nitto Terra Grappler G2 XL Tires
- Foose Switch 20x9 wheels
- Anzo Black Headlights
- Diode Dynamics 8000K HID kit
- Diode Dynamics switchback turn signals
- Diode Dynamics cargo and tag lights
- Morimoto black LED fog lights
- Truxedo Deuce 2 bed cover
- 25% front tint, 55% rear and moonroof tint
- Line-X
- Debadged
- AVS BugFlector
The following users liked this post:
MagNitto (09-03-2016)
#2846
Mixed black candy tint to a 2k clear and sprayed them after taping off the lines. Then another coat of clear afterwards to seal everything. I'll be trimming the front headlight soon also to minimize the chrome appearance on them without having to disassemble them.
Sorry I added all the pics I took.
Sorry I added all the pics I took.
#2847
it is a kit but I had to cut the bottom of the plastic to the console to get it to fit. it came with plastic connectors for the back of the switches but those are too long and the panel wouldn't fit flush with those so I had to solder each wire on to the switches. I found a video on YouTube and saw the panel on the video. I can give you the info if you're interested.
#2849
I am interested in that switch set up! Details please?
Thanks in advance
#2850
jtrischler@roushvehicles.net
but I had to cut the bottom of the cubby for the switches to fit properly. I also had to solder the wires directly to the switches because the quick connects were too long and the panel wouldn't sit flush with them connected. it's a little pricy but I liked the setup so I bit the bullet.
The following users liked this post:
spj2017 (09-06-2016)