16XLT

Very nice idea. Wish I had a center console.

Bill_The_PA

very nice. Is that a kit? Where U buy it?

EPag

iTrader: (1)

2 inch RC level

285/75R17 (34x11.22) Falken Wildpeak A/T3Ws

17x8.5 +15mm offset American Outlaw Hollywood wheels

ICI Magnum RT step rails

Like-X Premium bed liner

26% tint all around, 78% ceramic windshield tint

Husky Weather Beater mats all around

MagNitto

• 2.25" ReadyLift Level
• 3" ReadyLift Rear blocks
• 305/55R20 Nitto Terra Grappler G2 XL Tires
• Foose Switch 20x9 wheels
• Anzo Black Headlights
• Diode Dynamics 8000K HID kit
• Diode Dynamics switchback turn signals
• Diode Dynamics cargo and tag lights
• Morimoto black LED fog lights
• Truxedo Deuce 2 bed cover
• 25% front tint, 55% rear and moonroof tint
• Line-X
• Debadged
• AVS BugFlector

Truckin

iTrader: (4)

Very nice! looks great

gonzoInc

Mixed black candy tint to a 2k clear and sprayed them after taping off the lines. Then another coat of clear afterwards to seal everything. I'll be trimming the front headlight soon also to minimize the chrome appearance on them without having to disassemble them.

Sorry I added all the pics I took.

young.dryw

it is a kit but I had to cut the bottom of the plastic to the console to get it to fit. it came with plastic connectors for the back of the switches but those are too long and the panel wouldn't fit flush with those so I had to solder each wire on to the switches. I found a video on YouTube and saw the panel on the video. I can give you the info if you're interested.

Qik Slvr

Truck looks amazing

spj2017

I am interested in that switch set up! Details please?

Thanks in advance

young.dryw

here's the email for the guy who makes them

jtrischler@roushvehicles.net

but I had to cut the bottom of the cubby for the switches to fit properly. I also had to solder the wires directly to the switches because the quick connects were too long and the panel wouldn't sit flush with them connected. it's a little pricy but I liked the setup so I bit the bullet.