What Mods/Changes Have You Done To Your 2015 or 2016???
12-11-2016, 04:11 PM
#3361
Cowboy of the Skies
5 liter V8 with 5 Star tuner.
In regular gas tune even its just a lot snappier.
The throttle response is quicker, it shifts better, isn't always trying to jump up a gear when the revs are ridiculously low.
It probably on a dyno only makes an extra few HP....but because of the response it feels like you gain 100.
Run a 5 star on my mustang as well.
Tow mode is nice.
And you can run the performance tune on premium gas if you choose.
In regular gas tune even its just a lot snappier.
The throttle response is quicker, it shifts better, isn't always trying to jump up a gear when the revs are ridiculously low.
It probably on a dyno only makes an extra few HP....but because of the response it feels like you gain 100.
Run a 5 star on my mustang as well.
Tow mode is nice.
And you can run the performance tune on premium gas if you choose.
The following 2 users liked this post by WestsydeGuy:
Phil48315 (12-11-2016),
wildcat333 (12-11-2016)
12-11-2016, 05:58 PM
#3362
That's Mr. Tippy to you.
Finished off putting my Anzos and Morimotos in this weekend. Tried putting on Lamin-X on both. That was a fail. All in all like how they came out. Completely changes the look.
The following users liked this post:
WestsydeGuy (12-12-2016)
12-11-2016, 09:01 PM
#3363
Senior Member
OT, But related to Mods/Changes-->
Every time I start taking something apart (Mods/Changing), I run into a "Torx Bit/Tool Required" for removal.
Please point/recommend me to a Torx only set that will prevent me from having to drop what I'm doing to go purchase the right size, would like to get a complete set of all the must have size bits & drives, what should I be looking for?
I've checked a few of the local box stores but all the sets I've seen so far come with a bunch of bits/sockets that aren't Torx (Phillips, flat-blade screwdriver bits, etc.)
Every time I start taking something apart (Mods/Changing), I run into a "Torx Bit/Tool Required" for removal.
Please point/recommend me to a Torx only set that will prevent me from having to drop what I'm doing to go purchase the right size, would like to get a complete set of all the must have size bits & drives, what should I be looking for?
I've checked a few of the local box stores but all the sets I've seen so far come with a bunch of bits/sockets that aren't Torx (Phillips, flat-blade screwdriver bits, etc.)
The following users liked this post:
Husker (12-11-2016)
12-11-2016, 11:06 PM
#3365
The following users liked this post:
R573 (01-02-2017)
12-11-2016, 11:34 PM
#3366
That's Mr. Tippy to you.
12-11-2016, 11:53 PM
#3367
Senior Member
The following 2 users liked this post by Papa_nmez:
AutoAnything (12-12-2016),
tippydp (12-12-2016)
12-12-2016, 01:20 AM
#3368
Originally Posted by tippydp
Finished off putting my Anzos and Morimotos in this weekend. Tried putting on Lamin-X on both. That was a fail. All in all like how they came out. Completely changes the look.
Last edited by ricky81; 12-12-2016 at 01:24 AM.
12-12-2016, 01:56 AM
#3369
That's Mr. Tippy to you.
Yeah wanted to protect my headlights and fogs but man were they a PITA. Lol. So I decided if and when I do get my front end wrapped I'll have them do the lights then. But until then I can do without.
12-12-2016, 07:50 AM
#3370
Super Moderator
-=-