Papermakers future system
#1
Papermaker24
Thread Starter
Papermakers future system
Well, I'm almost ready to start this build....my largest to date, and most modern. Here is the stuff I have. If anyone can think of anything I'm missing give me a holla......
The BIG BOYS.....
The BIG BOYS.....
#2
Papermaker24
Thread Starter
Now the other stuff.....
* 1/0 welding cable for power/ground
*200 amp circuit breaker
*Raptor power/ground Dist block
*4ga power/ground to amps
*FOR-11Ck harness---would like to NOT cut harness to solder to speed wire. If anyone knows the plug to buy to fit this so I can make it completely PNP that would be great....
*Speed wire
*Noico
*Install bay silicone baffles front/rear
*Hush Car block off covers
*All size wire ferrules and crimper
*Rivnut installer
*3' RCA
*Speaker plug adapters/mounts
*ACR 3
*3-D printed tweeter mounts
*Sheet of ABS for amp rack
*Fast Rings
*Mini tap a fuse
*Tesa tape
*Waterproof fitting if I go thru the floor.
I think that covers it.......if anyone thinks of something else please let me know.
I still need stainless or black mounting screws for amps.
* 1/0 welding cable for power/ground
*200 amp circuit breaker
*Raptor power/ground Dist block
*4ga power/ground to amps
*FOR-11Ck harness---would like to NOT cut harness to solder to speed wire. If anyone knows the plug to buy to fit this so I can make it completely PNP that would be great....
*Speed wire
*Noico
*Install bay silicone baffles front/rear
*Hush Car block off covers
*All size wire ferrules and crimper
*Rivnut installer
*3' RCA
*Speaker plug adapters/mounts
*ACR 3
*3-D printed tweeter mounts
*Sheet of ABS for amp rack
*Fast Rings
*Mini tap a fuse
*Tesa tape
*Waterproof fitting if I go thru the floor.
I think that covers it.......if anyone thinks of something else please let me know.
I still need stainless or black mounting screws for amps.
Last edited by papermaker; 07-11-2019 at 02:54 PM.
The following users liked this post:
woodall01 (07-11-2019)
#3
You need acoustical foam for inside the doors and closed cell foam as a decoupler between panels. I prefer these:
Acoustical foam cut into 4x5 blocks (adhesive backed)
https://www.parts-express.com/sonic-...-x-24--260-535
Closed cell foam (adhesive backed)
Vibro 228 mil -1/4" Sound Dampening Insulator-100% Waterproof Closed Cell Foam -Car Sound Deadening Material - Automotive Sound Deadener 9 Large Sheets-Buy & Support Made in USA- Not Russia or China
Acoustical foam cut into 4x5 blocks (adhesive backed)
https://www.parts-express.com/sonic-...-x-24--260-535
Closed cell foam (adhesive backed)
Vibro 228 mil -1/4" Sound Dampening Insulator-100% Waterproof Closed Cell Foam -Car Sound Deadening Material - Automotive Sound Deadener 9 Large Sheets-Buy & Support Made in USA- Not Russia or China
#4
'19 Lariat 3.5
Edit: Nevermind. Learned what Noico is today.
#5
Papermaker24
Thread Starter
#6
Senior Member
I really like this stuff now compared to foam. I just used it in my wife's car. It is a decoupler and an acoustical barrier for higher frequencies (like road noise frequencies). It nearly eliminated the noise coming from her doors....too bad her car is not very well insulated every where else
https://www.sonicelectronix.com/item...tic-SSQLT.html
Here are the factory specs on it
https://www.3m.com/3M/en_US/company-...2659042&rt=rud
Or you can buy some foam from here too:
https://resonixsoundsolutions.com/
https://www.sonicelectronix.com/item...tic-SSQLT.html
Here are the factory specs on it
https://www.3m.com/3M/en_US/company-...2659042&rt=rud
Or you can buy some foam from here too:
https://resonixsoundsolutions.com/
Last edited by jdunk54nl; 07-11-2019 at 06:10 PM.
#7
Papermaker24
Thread Starter
Am I going to be ok with an old HP laptop to set up the 6-1200? Was playing around with it today and it's really slow. My oldest had a MacBook air........does a PC and Mac do the same thing with the program?
Trending Topics
#8
'19 Lariat 3.5
I think you'll need more horsepower for running REW, more than the AudioControl DM Smart DSP
#9
You need acoustical foam for inside the doors and closed cell foam as a decoupler between panels. I prefer these:
Acoustical foam cut into 4x5 blocks (adhesive backed)
https://www.parts-express.com/sonic-...-x-24--260-535
Closed cell foam (adhesive backed)
Vibro 228 mil -1/4" Sound Dampening Insulator-100% Waterproof Closed Cell Foam -Car Sound Deadening Material - Automotive Sound Deadener 9 Large Sheets-Buy & Support Made in USA- Not Russia or China https://www.amazon.com/dp/B079LZY3TZ..._ez5jDbEBR89FY
Acoustical foam cut into 4x5 blocks (adhesive backed)
https://www.parts-express.com/sonic-...-x-24--260-535
Closed cell foam (adhesive backed)
Vibro 228 mil -1/4" Sound Dampening Insulator-100% Waterproof Closed Cell Foam -Car Sound Deadening Material - Automotive Sound Deadener 9 Large Sheets-Buy & Support Made in USA- Not Russia or China https://www.amazon.com/dp/B079LZY3TZ..._ez5jDbEBR89FY
#10
Now the other stuff.....
* 1/0 welding cable for power/ground
*200 amp circuit breaker
*Raptor power/ground Dist block
*4ga power/ground to amps
*FOR-11Ck harness---would like to NOT cut harness to solder to speed wire. If anyone knows the plug to buy to fit this so I can make it completely PNP that would be great....
*Speed wire
*Noico
*Install bay silicone baffles front/rear
*Hush Car block off covers
*All size wire ferrules and crimper
*Rivnut installer
*3' RCA
*Speaker plug adapters/mounts
*ACR 3
*3-D printed tweeter mounts
*Sheet of ABS for amp rack
*Fast Rings
*Mini tap a fuse
*Tesa tape
*Waterproof fitting if I go thru the floor.
I think that covers it.......if anyone thinks of something else please let me know.
I still need stainless or black mounting screws for amps.
* 1/0 welding cable for power/ground
*200 amp circuit breaker
*Raptor power/ground Dist block
*4ga power/ground to amps
*FOR-11Ck harness---would like to NOT cut harness to solder to speed wire. If anyone knows the plug to buy to fit this so I can make it completely PNP that would be great....
*Speed wire
*Noico
*Install bay silicone baffles front/rear
*Hush Car block off covers
*All size wire ferrules and crimper
*Rivnut installer
*3' RCA
*Speaker plug adapters/mounts
*ACR 3
*3-D printed tweeter mounts
*Sheet of ABS for amp rack
*Fast Rings
*Mini tap a fuse
*Tesa tape
*Waterproof fitting if I go thru the floor.
I think that covers it.......if anyone thinks of something else please let me know.
I still need stainless or black mounting screws for amps.