Best modifications under $50
#6721
Senior Member
The following users liked this post:
FX4_2014F150 (01-16-2016)
#6722
Senior Member
Anyone ever done anything simple with their tail lights? I am not looking into blacking them completely out. I just want to hide the chrome part all around the light. I plan on building my tails when I get the time off to cut them apart or find spares. I am pretty much looking for ideas lol.
That's the thread if you haven't found it already.
#6723
Anzo LED reverse use $27
$27 for 2 LED LIGHT SET WITH MOUNTING BRACK AND WIRING,DRAW TIES,TOGGLE SWITCH
Removed left tail light and spliced into reverse light harness
Ran wiring thru bottom outlet from tail light
#6725
Junior Member
The Iowa Department of Transportation’s (DOT) Office of Motor Vehicle Enforcement (MVE) is reporting an increase in questions related to safe and lawful trailer hitch attachment in Iowa. The majority of questions relate to whether you must remove the trailer hitch from your vehicle when a trailer is not attached. Iowa DOT’s MVE Major Ned Lewis clarified that there is no Iowa law that requires a hitch be removed when a trailer is not in tow.
#6726
Senior Member
Under Hood LED Lighting
1 hour project. Cost me under $10 for the LED lights and Hood pin switch. if not counting wires, wire loom, and zip ties which I always have on hand.
Voila ! but you can see more detailed pictures here: Under Hood LED Lighting
Voila ! but you can see more detailed pictures here: Under Hood LED Lighting
The following 2 users liked this post by TXFRDOwner:
1oldtimer (01-18-2016),
Brett2013fx4 (01-18-2016)
The following users liked this post:
1oldtimer (01-18-2016)
#6728
Junior Member
Added some USB ports in the back of the center console. I wanted to keep the existing outlets in tact. The USB connector was about $13 on Amazon. Took an hour or two taking my time and measuring twice, cut once. I removed the USB cover to get the cover flush with the console. Tapped into the 12v wires and all is good.
The following users liked this post:
Suburb Cowboy (06-07-2016)
The following users liked this post:
FX-Madness (01-19-2016)
#6730
Senior Member