When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think that's been done before...if you have a 4x4 and use the stock wheels. May have some minor trimming. My 275x60's fit easily at stock height but they are 33x11 instead of 34x11.
I think they'll work with a little effort...the 275x65x20 is a stock size on some 3/4 ton pickups so they're more readily available in case you need one in a hurry.
I have a 2011 XLT 2WD with Bilstein 5100's at the top notch setting and the oem rear 4x4 1.25" lift block. Stock 18s which I think are same size/offset as yours.
I mounted 275/70/18 tires and they fit well with no rubbing issues. There is a lot of clearance and you should be fine fitting them imo:
. This is the exact look I am going for on my 4x2 XLT. I don't have much use for a 4x4 so I went with 4x2 but I hate the way mine looks right now. I would like to hear some input on people running the Bilsteins on the highest setting. I have seen a few bad reviews but I know on the forums sometimes people blow things out of proportion. TIA!
Took the plunge and had these put on today. 285/55r20 terra grapplers on 20x9 12mm offset Dick Cepek Matrix's. Little trimming on the weather tech mud flaps but no rub on full turn either direction now. Happy with how it turned out.