07 F150 V10 3V Swap Thread!!
05-07-2018, 01:29 AM
#91
Senior Member
Thread Starter
The tab i welded to my lower trains cooler bracket to hold the water separator.
Water separator in and plumbed.
Proof that even with a mechanical fan it all fits!
this is the part of a project that I hate so much. The last 10% that takes 50% of the time. I worked all day and have little to show, but progress was made. The transmission is plumbed, the engine dip stick is in (had to disassemble the driver's side and drop the manifold), the reshaped trains dip stick is in, the radiator hoses are in and whatis in it''s right. A mechanical fan still clears but I think I'm going to convert to electric. What a day!
Last edited by Blueoval_boy_64; 05-08-2018 at 12:22 AM.
05-08-2018, 12:21 AM
#93
Senior Member
Thread Starter
If anyone was thinking of putting in a 5R110 you'll need at least a 1" body lift... or rop drop some notching. And if you think a BFH will get it done see the dimples in my file piece....
