07 F150 V10 3V Swap Thread!!
The following users liked this post:
Blueoval_boy_64 (08-10-2019)
#382
Senior Member
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
Not the video I was hoping to post but it's progress. Turns out i need new front calipers since the bleeder valves broke off. I needed (for my sanity) to see this thing move and here it is!! I'm hoping itll be ready to test drive this weekend.
Note: it runs rough in the start of the video because the PCM has to relearn every time I fire it up. I have to unhook the battery every time because it still thinks all 4 doors are open since the interior isnt even close to being together.
Note: it runs rough in the start of the video because the PCM has to relearn every time I fire it up. I have to unhook the battery every time because it still thinks all 4 doors are open since the interior isnt even close to being together.
The following 8 users liked this post by Blueoval_boy_64:
Firerunner (08-18-2019),
Flackyou (06-10-2020),
Hank05 (08-14-2019),
isvend (08-14-2019),
Johnny_bravo00 (08-13-2019),
and 3 others liked this post.
#384
Senior Member
Thread Starter
The following 2 users liked this post by Blueoval_boy_64:
92497pmu (09-03-2019),
Eric Kleven (08-12-2019)
#387
Senior Member
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
It's a 6" Fabtech that the previous owner cranked to a 8" in the front. I'm going to level the tear soon and get rid of the ghost trailer look.
I'm keeping the 6 lug and going to step up to 37/13.50R20 Cooper STT pros at some point soon. Keeping with the 20x10 wheels though. I like the look of the 20x12s but the offset makes them rub and this thing is going to see some use!
The following 3 users liked this post by Blueoval_boy_64:
#389
Senior Member
Thread Starter
![Default](https://www.f150forum.com/images/icons/icon1.gif)
![](https://cimg5.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/20190814_205728_d9d22aaaa18d7ecd7ba738c10d6fd330c2514066.jpg)
![](https://cimg9.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/20190814_211226_123be91961990181cb643f037129d58d52d2174c.jpg)
I think this thing is going to sound good! I had to stop on the exhaust since I'm out of gas but these are some big pipes!
I had to drop the evap canister to be able to drill a top bolt for the DS exhaust hanger but she's now in there! Just need to tack this up, bend a few hangers and burn it in!
The following 3 users liked this post by Blueoval_boy_64:
#390
Senior Member
![Default](https://www.f150forum.com/images/icons/icon1.gif)
That middle leaf spring looks a little rusty!
Keep an eye on her.
Keep an eye on her.