07 F150 V10 3V Swap Thread!!
#562
Senior Member
Thread Starter
I had to move this thing out of the shop to swap a radiator for my brother..... and the throttle response on this thing..... OMG........ I still hold true to this swap not being worth it...... but WOW.........
#563
#564
Senior Member
Thread Starter
#565
Senior Member
Thread Starter
The panels really don't line up that well so I'm taking them to an interior shop tomorrow. I'm hoping that by the time they are done I can have the last few things done and finish this thing! I'll hopefully have time to build the front end crossmember (part of the lift that hits the oil pan) done soon so that I can take this thing for a shakedown run!!
The following 7 users liked this post by Blueoval_boy_64:
Blue2016XL (06-17-2020),
cl601amt (06-17-2020),
Firerunner (06-17-2020),
International96 (06-17-2020),
ivanthebear (06-17-2020),
and 2 others liked this post.
#567
Senior Member
Looks like she was designed to pull.
Axle placement on the trailer looks far forward. Is that for a specific type of load?
Axle placement on the trailer looks far forward. Is that for a specific type of load?
#568
Senior Member
Thread Starter
I have a set I'd 8k Dexter axles that will be going in it soon. Planning on putting them back at 60% of the deck length
The following 2 users liked this post by Blueoval_boy_64:
Firerunner (06-17-2020),
Johnny_bravo00 (06-17-2020)
#569
Senior Member
Thread Starter
The throttle response on this thing is AMAZING but it REALLY needs a set of gears in it. 4th gear basically feels like 5th gear. I'll do another video on this thing once the interior is finished and a few of the bugs are worked out.
The following users liked this post:
Johnny_bravo00 (06-17-2020)