07 F150 V10 3V Swap Thread!!
#671
Senior Member
Thread Starter
Door panels are coming along. I ordered some sander pads to sand the seams today, so hoping to knock the rest of this out today. I did get the lower trays done and welded back in. The arm rests should be done this week, so that should help a lot with the interior cabin noise. Also ordering the new 30" muffler. I'm REALLY going to miss the sound of this thing screaming. Maybe when I do the 4v head swap, I'll redo the exhaust and toss in some fun cutouts!
Still trying to source some final things. The A pillar trim on the drivers side is giving me some issues. The tabs don't line up and I don't have the skill to weld in new tabs. on the passenger side I can move the nutzert on the handle to hold it in place, but they never made a handle on the drivers side. It also is short to the headliner and I would need to extend them. My hope (I wish I'd have thought of this while I was at the junkyard) is to try the trim from the SDs. I believe the dash is close to the same and they have handles on both sides. They don't have the tweeter locations, but that would be an easy addition.
The main thing I need are black seat belts. My 07 ones are moldy and not wanting to work with the 09 RCM. I've sent a few emails to some yards so hopefully I can get those in and really put some miles on it!
As always, thanks for staying with me on this crazy adventure.
Still trying to source some final things. The A pillar trim on the drivers side is giving me some issues. The tabs don't line up and I don't have the skill to weld in new tabs. on the passenger side I can move the nutzert on the handle to hold it in place, but they never made a handle on the drivers side. It also is short to the headliner and I would need to extend them. My hope (I wish I'd have thought of this while I was at the junkyard) is to try the trim from the SDs. I believe the dash is close to the same and they have handles on both sides. They don't have the tweeter locations, but that would be an easy addition.
The main thing I need are black seat belts. My 07 ones are moldy and not wanting to work with the 09 RCM. I've sent a few emails to some yards so hopefully I can get those in and really put some miles on it!
As always, thanks for staying with me on this crazy adventure.
Last edited by Blueoval_boy_64; 01-31-2021 at 03:05 PM.
The following users liked this post:
tareed94 (02-05-2021)
#672
Great to see the updates. Thing sounds good.
The following users liked this post:
Blueoval_boy_64 (02-06-2021)
The following users liked this post:
Blueoval_boy_64 (02-06-2021)
#676
Senior Member
Thread Starter
New issue. The truck wants to hear up at highway speeds. I can cruise around all day in town, but getting up to speed causes the temps to rise.
Wondering if the lack of space between the fans and radiator is an issue.
#677
Dielectrically 5w30
Shouldn't need/have any space between fans/radiator.
I'm assuming it's a known good thermo and it's fully opening?
I'm assuming it's a known good thermo and it's fully opening?
#678
Senior Member
Thread Starter
#679
Dielectrically 5w30
So long as you can confirm it's fully opening (maybe try the boiling water/pan test before swapping it in?) then we can start looking elsewhere.
The following users liked this post:
sllydderrr (02-07-2021)
#680
Senior Member
Thread Starter
really annoyed at myself for that brain fart...
The following 5 users liked this post by Blueoval_boy_64:
Blue2016XL (02-06-2021),
Johnny_bravo00 (02-07-2021),
sllydderrr (02-07-2021),
Spike0180 (05-09-2022),
[F2C]MaDMaXX (02-06-2021)