When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's good to hear. Which tails do you have? I was looking for something to match or be very similar to what that 3rd brake light looks like.
Not sure of the brand but they look just like the ones that 06HD150 posted. I got mine from a store that sells items that have small imperfections in them.
Since I have a red truck, this is the one I bought. The smoked part matches the smoked part on my reverse section on my taillights. Just the center section is LED, the cargo lights reuse stock bulbs/connector:
Very nice! Didn't you just do a front end tune up? Turns out I need upper and lower ball joints on both sides. Do you recommend a brand? The ones now are factory with 134k on them. I'm lifted 6-8" if that matters.
Very nice! Didn't you just do a front end tune up? Turns out I need upper and lower ball joints on both sides. Do you recommend a brand? The ones now are factory with 134k on them. I'm lifted 6-8" if that matters.
I also need upper ball joints and wheel bearing if you have any recommendations!
Very nice! Didn't you just do a front end tune up? Turns out I need upper and lower ball joints on both sides. Do you recommend a brand? The ones now are factory with 134k on them. I'm lifted 6-8" if that matters.
Yes I did. Moog lower ball joints, tie-rod ends and sway bar bushings. For the sway bar links I went with AC Delco. I used Monroe Reflex struts to retain my factory coil springs. I had already done Moog upper control arms a year ago. Steering and handling is greatly improved!
You have my attention Jon. I have been trying to figure out the best option for yellow fog conversion.
I used Duplicolor Metal Cast Yellow. 2 light coats, let them dry, wet sanded and then 2 heavier coats. Let that dry and then used Meguiars Ultimate Compound. These will be so freaking yellow because I have Nokya Hyper Yellow bulbs already. I did basically the same thing in my old Focus.
make sure the hardware is there. i learned the hard way even though i got a great deal. pivot pins and and plastic grommets will cost around $25-30 if there are not there.
04-17-2016, 06:21 AM
