Jason Mullins

Ive read the posts where u can use a needle bearing fitting on a grease gun and pack the boots full of grease and ive done that, the whole front end underneath has been greased, just replaced upper and lower ball joints. Do i need to change the sway bar? This squeak when i turn is driving me crazy

NorthernMudder

I have the same problem as well haven't replaced and joints I'm thinking its my u joints and ball joints

Jason Mullins

Im gonna grease the pitman arm boots again tonight i dont think i got it last time

2000fordf1504x4

I had that same problem it seems to happen a lot on these trucks

NorthernMudder

What did you do to fix it ?

2000fordf1504x4

I sold the truck before I figured it out I'd tried everything that u guys did but nothing worked

NorthernMudder

So did u replace the u and ball joints as well?

2000fordf1504x4

Ya I did them at least twice on that truck but I think they were a little wore at the end because the rubber seal thing was torn

NorthernMudder

Ok thanks so u think that the rubber seal thing might work if its torn

Frank_Ford

If you can get a buddy to bounce on the bumper while you are underneath the truck, perhaps you can hear the squeak and determine where it is coming from. I had a similar problem on another vehicle and found it was coming from the shock absorber. It might also be the fittings on the anti sway bar. Please let us know where it comes from if you find it.
thanx