Thinking
Senior Member
Yeah , but it all went wrong now....it's ruined
Nah, Kennedy no longer sells the liner in green or brown. It was described on a old ad as wool liners. Kennedy does offer some PVC composite only in black. Copied and pasted that a ways back....don't think everybody was following at the time.
The old boxes on e bay have it though.
You can get green liners 3rd party as well...but it's not wool. I posted the links for those way back.
Nah, Kennedy no longer sells the liner in green or brown. It was described on a old ad as wool liners. Kennedy does offer some PVC composite only in black. Copied and pasted that a ways back....don't think everybody was following at the time.
The old boxes on e bay have it though.
You can get green liners 3rd party as well...but it's not wool. I posted the links for those way back.
The following users liked this post:
white89gt (01-06-2024)
Senior Member
Wonder what's going on with Pauls wrecker motor ? Haven't heard anything about it in awhile now...waiting for parts?
The following users liked this post:
white89gt (01-06-2024)
Senior Member
I'll go back and look at those links.
I was wondering about the wrecker too. That ought to be interesting to see how it does and sounds.
I was wondering about the wrecker too. That ought to be interesting to see how it does and sounds.
Senior Member
My parents had me come over and set up their new 70" Samsung TV. They sent me home with their old 57" TV, which is a HiSense. Not the greatest brand ever, but... I'll have a decent sized garage TV. Gotta get creative with a mount. Might need to put the welder to use with one of my ideas.
Senior Member
Gettin' at us today....
Smarter than most Racoons
Senior Member
Smarter than most Racoons
Never done a remote start.
Using the poor search functions of this site I found little.
This may help:
https://www.the12volt.com/installbay...asp?tid=134275
Click around on here too, depending n year of your truck.
I'll keep looking
Using the poor search functions of this site I found little.
This may help:
https://www.the12volt.com/installbay...asp?tid=134275
Click around on here too, depending n year of your truck.
I'll keep looking
Last edited by ultimatenoobie; 01-07-2024 at 05:00 PM.
The following users liked this post:
BillSF9c (01-07-2024)
Senior Member
This may help:
https://www.the12volt.com/installbay...asp?tid=134275
Click around on here too, depending n year of your truck.
I'll keep looking
https://www.the12volt.com/installbay...asp?tid=134275
Click around on here too, depending n year of your truck.
I'll keep looking
On, no - I have to sand and paint the roof first, (think I'll get a bargain belt sander.) And seal the rear window. Scurrying to dejunk the bed and pull a near-new fridge from it, now, so I can help a young wrench move to his own, new location, tomorrow.
Super Moderator
Back to work on the Camaro, finally have all the parts for the fuel system.
Well, to get it back running.....
It has a 3/8" fuel line, then a 5/16" fuel filter, to give it a 1/" return before the 3/8" regulator and carb inlet.
I have plans to correct it to all 3/8" and add a gauge between the regulator and carb.
(It was originally Tuned-Port injection but has been changed to a carb)
Got the fuel access panel done, I rounded the corners on the disc sander, and straightened & beveled the edges on the belt sander.
I have been waiting for the snow showers to stop and the ground to dry up a little to pull the Wide Glide out but decided to just pull it forward.
1st load into the blast cabinet.
Not looking too bad, I was worried I might have to change the media, it's from 2010.
I bought a restoration grade media, it is pretty fine, and doesn't remove any metal.
Still seems to be doing the job even after over a decade!
Well, to get it back running.....
It has a 3/8" fuel line, then a 5/16" fuel filter, to give it a 1/" return before the 3/8" regulator and carb inlet.
I have plans to correct it to all 3/8" and add a gauge between the regulator and carb.
(It was originally Tuned-Port injection but has been changed to a carb)
Got the fuel access panel done, I rounded the corners on the disc sander, and straightened & beveled the edges on the belt sander.
I have been waiting for the snow showers to stop and the ground to dry up a little to pull the Wide Glide out but decided to just pull it forward.
1st load into the blast cabinet.
Not looking too bad, I was worried I might have to change the media, it's from 2010.
I bought a restoration grade media, it is pretty fine, and doesn't remove any metal.
Still seems to be doing the job even after over a decade!
The following 2 users liked this post by Phil48315:
ultimatenoobie (01-08-2024),
white89gt (01-07-2024)