2015 Blue Jeanie
#471
Abigail & Hannah’s dad
Thread Starter
It’s happened before and happened again last night, my resume/cancel cruise buttons wouldn’t work. Then 15 miles down the road, they worked again. Are they just going bad?
It’s not an all the time issue, just often enough that I forget about it.
It’s not an all the time issue, just often enough that I forget about it.
#472
TOTM November 2019
iTrader: (2)
Could that be a clock-spring issue?
https://www.f150forum.com/f118/cruis...issues-512345/
https://www.f150forum.com/f118/steer...orking-448877/
https://www.f150forum.com/f118/steer...ls-out-448761/
https://www.f150forum.com/f118/cruis...issues-512345/
https://www.f150forum.com/f118/steer...orking-448877/
https://www.f150forum.com/f118/steer...ls-out-448761/
Last edited by Summers22; 03-20-2022 at 02:06 PM.
The following users liked this post:
mdmay62 (03-20-2022)
#473
Abigail & Hannah’s dad
Thread Starter
Well if it’s the clockspring, I have a heated wheel that will be delivered tomorrow. I don’t know why but apparently you have to replace the clockspring as part of that swap process (maybe it makes sense once I’m there).
So it’s getting replaced at some point anyway.
So it’s getting replaced at some point anyway.
The following 2 users liked this post by 1995GreenMachine:
johnday in BFE (03-20-2022),
Summers22 (03-20-2022)
#474
TOTM August 2022
iTrader: (4)
The heated wheel clockspring is usually paired with adaptive cruise control so there are more pins to communicate with the heater and the different buttons for adaptive cruise control. They are drastically different but enough to follow the Ford way of making a whole new part for 1, 2, or 3 different features. I'm not sure but it might also have something to do with the different steering columns the (normal manual tilt and the power tilt).
The following users liked this post:
1995GreenMachine (03-20-2022)
#475
Dielectrically 5w30
On the 12th gen at least, it is not uncommon for the button modules to start going out, i don't imagine it changed too much for the 13th gen. They're easily replaceable modules for the 12th gen.
The following users liked this post:
[F2C]MaDMaXX (03-21-2022)
#477
Abigail & Hannah’s dad
Thread Starter
I’ve got to buy a clockspring regardless for the heated wheel project. I think it’d be odd that the least used buttons would be the ones to go bad first (as opposed to +/- and the d-pad) but nothing surprises me anymore.
The following 3 users liked this post by 1995GreenMachine:
#478
Abigail & Hannah’s dad
Thread Starter
Well look here, there’s some new cruise control buttons!
I always thought that trim was silver, it looks more like the graphite I have in my truck. Many thanks to @Bremsen for a pleasant transaction in the Buy/Sell/Trade section. It’s a very nice wheel.
I ordered the correct harness from Boosted Grey Goose designs, I have not ordered the clockspring, module, or the clips yet.
I always thought that trim was silver, it looks more like the graphite I have in my truck. Many thanks to @Bremsen for a pleasant transaction in the Buy/Sell/Trade section. It’s a very nice wheel.
I ordered the correct harness from Boosted Grey Goose designs, I have not ordered the clockspring, module, or the clips yet.
The following 6 users liked this post by 1995GreenMachine:
Firerunner (03-27-2022),
johnday in BFE (03-21-2022),
mdmay62 (03-21-2022),
sddesigns (03-21-2022),
Summers22 (03-21-2022),
and 1 others liked this post.
#479
Dielectrically 5w30
That does look like a nice wheel, seems the 13th gen wheel has some more nods to the shaping of the Raptor wheel that the 12th gen regular wheel.
The following users liked this post:
Firerunner (03-27-2022)